GELOY XTPM309 Resin SABIC IP Euro Acrylonitrile Styrene Acrylate + PC

Product Description
XTPM309 is a modified HRA170 with improved processing stability.Typical properties measured on natural material.
General
Material Status	Commercial: Active
Availability	Europe
Features	Good Processability
RoHS Compliance
Processing Method	Injection Molding

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183
Melt Volume-Flow Rate (MVR)			ISO 1133
220°C/10.0 kg		in³/10min
240°C/5.0 kg		in³/10min
260°C/5.0 kg		in³/10min
Water Absorption			ISO 62
Saturation, 73°F		%
Equilibrium, 73°F, 50% RH		%
Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus
--²		psi	ASTM D638
--		psi	ISO 527-2/1
Tensile Strength
Yield³		psi	ASTM D638
Yield⁴		psi	ASTM D638
Yield		psi	ISO 527-2/5
Yield		psi	ISO 527-2/50
Break³		psi	ASTM D638
Break⁴		psi	ASTM D638
Break		psi	ISO 527-2/5
Break		psi	ISO 527-2/50
Tensile Elongation
Yield³		%	ASTM D638
Yield⁴		%	ASTM D638
Yield		%	ISO 527-2/5, ISO 527-2/50
Break³		%	ASTM D638
Break⁴		%	ASTM D638
Break		%	ISO 527-2/5, ISO 527-2/50
Flexural Modulus⁵		psi	ISO 178
Flexural Strength^5, 6		psi	ISO 178
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength⁷			ISO 179/1eA
-22°F		ft·lb/in²
73°F		ft·lb/in²
Notched Izod Impact
-22°F		ft·lb/in	ASTM D256
-4°F		ft·lb/in	ASTM D256
14°F		ft·lb/in	ASTM D256
32°F		ft·lb/in	ASTM D256
73°F		ft·lb/in	ASTM D256
-22°F⁸		ft·lb/in²	ISO 180/1A
-4°F⁸		ft·lb/in²	ISO 180/1A
14°F⁸		ft·lb/in²	ISO 180/1A
32°F⁸		ft·lb/in²	ISO 180/1A
73°F⁸		ft·lb/in²	ISO 180/1A
Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature⁹
66 psi, Unannealed, 3.94 in Span		°F	ISO 75-2/Be
264 psi, Unannealed, 3.94 in Span		°F	ISO 75-2/Ae
Vicat Softening Temperature
--		°F	ISO 306/A50
--		°F	ISO 306/B50
--		°F	ISO 306/B120
Ball Pressure Test			IEC 60695-10-2
167°F
264°F¹⁰
CLTE			ISO 11359-2
Flow: 73 to 140°F		in/in/°F
Transverse: 73 to 140°F		in/in/°F
Electrical	Nominal Value	Unit	Test Method
Surface Resistivity		ohms	ASTM D257
Volume Resistivity		ohm·cm	ASTM D257
Dielectric Strength (0.0630 in, in Oil)		V/mil	ASTM D149
Dissipation Factor (1 MHz)			ASTM D150
Related Terminology
This supplier and product may also be known by these terms: GE Plastics Europe, LNP Engineering Plastics, GE Polymerland Europe, GE Polymerland, GE Plastics Product names can be difficult to match. You may have searched any one of these terms to find this product: GELOY* XTPM309 Resin, GELOY XTPM309 Resin, GELOY* , GELOY, GELOYXTPM309Resin, XTPM 309 Resin, XTPM309 Resin, XTPM309, 309Resin, XTPM309Resin, Acrylonitrile Styrene Acrylate + PC, Acrylonitrile Styrene Acrylate PC, Acrylonitrile Styrene Acrylate : PC, Acrylonitrile Styrene Acrylate / PC, Acrylonitrile Styrene Acrylate - PC, Acrylonitrile Styrene Acrylate _ PC, Acrylonitrile Styrene Acrylate PC, ASA+PC, ASAPC, ASA:PC, ASA/PC, ASA-PC, ASA_PC, ASA PC, Acrylonitrile Styrene Acrylate, ASA, SABIC IP Euro, AcrylonitrileStyreneAcrylatePC, AcrylonitrileStyreneAcrylate, AcrylonitrileStyreneAcrylate_PC, 309XTPM
Features
Features may also be described by the following terms: Good Processability, Easy Processing.

Injection	Nominal Value	Unit
Drying Temperature		°F
Drying Time		hr
Suggested Max Moisture		%
Hopper Temperature		°F
Rear Temperature		°F
Middle Temperature		°F
Front Temperature		°F
Nozzle Temperature		°F
Processing (Melt) Temp		°F
Mold Temperature		°F

Notes

¹Typical properties: these are not to be construed as specifications.

²0.20 in/min

³Type I, 0.20 in/min

⁴Type I, 2.0 in/min

⁵0.079 in/min

⁶Yield

⁷80*10*4 sp=62mm

⁸80*10*4

⁹120*10*4 mm

¹⁰Approximate maximum

GELOY* XTPM309 Resin

Acrylonitrile Styrene Acrylate + PC

Supplied by SABIC Innovative Plastics Europe