IDES Prospector Already have an account? Login Here

IDES

Samsung Total 530G

Low Density Polyethylene

Supplied by SAMSUNG TOTAL PETROCHEMICALS Co., Ltd.

The technical datasheet with complete property values for Samsung Total 530G is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
SAMSUNG TOTAL TOTAL 530G is a low-density polyethylene resin for general purpose films. This grade is designed to be processed in conventional blown film equipment.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
Additive 
  • High Slip
Features 
  • General Purpose
  • Good Processability
  • High Clarity
  • High Slip
  • Low Density
Uses 
  • Bags
  • Bottles
  • Closures
  • Film
  • Food Packaging
  • General Purpose
Appearance 
  • Clear/Transparent
Forms 
  • Pellets
Processing Method 
  • Blown Film
  • Injection Molding
  
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ASTM D1238
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength (Break)
psi
 ASTM D638
Tensile Elongation (Break)
%
 ASTM D638
Films
Nominal Value
Unit
Test Method
Film Thickness - Tested
mil
  
Tensile Strength
     ASTM D882
MD: Break, 1.6 mil
psi
  
TD: Break, 1.6 mil
psi
  
Tensile Elongation
     ASTM D882
MD: Break, 1.6 mil
%
  
TD: Break, 1.6 mil
%
  
Dart Drop Impact (1.6 mil)
g
 ASTM D1709
Thermal
Nominal Value
Unit
Test Method
Brittleness Temperature
°F
 ASTM D746
Vicat Softening Temperature
°F
 ASTM D1525 2
Melting Temperature
°F
  
Optical
Nominal Value
Unit
Test Method
Haze (1.57 mil)
%
 ASTM D1003
Additional Information
Blocking, SAMSUNG TOTAL: 240 g/10cm³
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Samsung Total 530G, Samsung Total , SamsungTotal530G, SamsungTotal, Total 530 G, Total530G, Total530, Total, 530 G, 530G, Polyethylene, Low Density, Polyethylene Low Density, LDPE, Polyethylene, PE, PolyethyleneLowDensity, G530, 530Total
Features
Features may also be described by the following terms: Low Density, Low Specific Gravity, High Slip, High Clarity, Good Processability, Easy Processing.
Uses
Uses may also be described by the following terms: Food Packaging.
Extrusion
Nominal Value
Unit
 
Cylinder Zone 1 Temp.
°F
  
Cylinder Zone 2 Temp.
°F
  
Cylinder Zone 3 Temp.
°F
  
Cylinder Zone 4 Temp.
°F
  
Cylinder Zone 5 Temp.
°F
  
Die Temperature
°F
  
Extrusion Notes
Blow up ratio: 1 to 2
Notes
1Typical properties: these are not to be construed as specifications.
2Loading 1 (10 N)
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.