IDES Prospector Already have an account? Login Here

IDES

Samsung Total 532L

Low Density Polyethylene

Supplied by SAMSUNG TOTAL PETROCHEMICALS Co., Ltd.

The technical datasheet with complete property values for Samsung Total 532L is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
SAMSUNG TOTAL TOTAL 532L is a low-density polyethylene resin for skin layer of multi-layer lamination films. This grade is designed to be processed in conventional blown film equipment.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
Features 
  • Good Flexibility
  • Good Processability
  • Good Surface Finish
  • Heat Sealable
  • High Clarity
  • High Gloss
  • High Tensile Strength
  • Low Density
  • Low Gel
  • Opticals
Uses 
  • Film
  • Laminates
  • Medical/Healthcare Applications
  • Sheet
  
Appearance 
  • Clear/Transparent
Forms 
  • Pellets
Processing Method 
  • Blown Film
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ASTM D1238
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength (Break)
psi
 ASTM D638
Tensile Elongation (Break)
%
 ASTM D638
Apparent Bending Modulus
psi
 ASTM D747
Films
Nominal Value
Unit
Test Method
Film Thickness - Tested
mil
  
Tensile Strength
     ASTM D882
MD: Yield, 1.6 mil
psi
  
TD: Yield, 1.6 mil
psi
  
Tensile Elongation
     ASTM D882
MD: Break, 1.6 mil
%
  
TD: Break, 1.6 mil
%
  
Dart Drop Impact (1.6 mil)
g
 ASTM D1709
Seal Initiation Temperature (1.6 mil)
°F
  
Thermal
Nominal Value
Unit
Test Method
Brittleness Temperature
°F
 ASTM D746
Vicat Softening Temperature
°F
 ASTM D1525 2
Melting Temperature
°F
  
Optical
Nominal Value
Unit
Test Method
Gloss (45°, 1.57 mil)
 
 ASTM D2457
Haze (1.57 mil)
%
 ASTM D1003
Additional Information
Heat Seal Strength, SAMSUNG TOTAL: 1200 g/cm²
Fish-eye, SAMSUNG TOTAL: 1 ea/g
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Samsung Total 532L, Samsung Total , SamsungTotal532L, SamsungTotal, Total 532 L, Total532L, Total532, Total, 532 L, 532L, Polyethylene, Low Density, Polyethylene Low Density, LDPE, Polyethylene, PE, PolyethyleneLowDensity, L532, 532Total
Features
Features may also be described by the following terms: Low Density, Low Specific Gravity, High Clarity, High Tensile Strength, Good Processability, Easy Processing, Low Gel, Good Surface Finish, High Gloss, Good Flexibility, Flexible.
Uses
Uses may also be described by the following terms: Medical Applications.
Extrusion
Nominal Value
Unit
 
Cylinder Zone 1 Temp.
°F
  
Cylinder Zone 2 Temp.
°F
  
Cylinder Zone 3 Temp.
°F
  
Cylinder Zone 4 Temp.
°F
  
Cylinder Zone 5 Temp.
°F
  
Melt Temperature
°F
  
Die Temperature
°F
  
Extrusion Notes
Blow up ratio: 1 to 2
Notes
1Typical properties: these are not to be construed as specifications.
2Loading 1 (10 N)
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.