IDES Prospector Already have an account? Login Here

IDES

Samsung Total 4220F

Linear Low Density Polyethylene

Supplied by SAMSUNG TOTAL PETROCHEMICALS Co., Ltd.

The technical datasheet with complete property values for Samsung Total 4220F is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
SAMSUNG TOTAL TOTAL's linear low density polyethylene for heavy duty packaging is available in a variety of products to suit the packaging weight of the final product. The material for heavy duty packaging has been developed to contain the no slipping, heat sealing characteristics and the mechanical strength required for such an application.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
Additive 
  • Low Slip
Features 
  • Copolymer
  • General Purpose
  • Good Heat Seal
  • Good Processability
  • Good Tear Strength
  • High Impact Resistance
  • Low Density
  • Low Slip
  • Opticals
Uses 
  • Bags
  • General Purpose
  • Packaging
Appearance 
  • Clear/Transparent
Forms 
  • Pellets
Processing Method 
  • Blown Film
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ASTM D1238
Films
Nominal Value
Unit
Test Method
Film Thickness - Tested
mil
  
Tensile Strength     ASTM D882
MD: Yield, 1.5 mil
psi
  
TD: Yield, 1.5 mil
psi
  
MD: Break, 1.5 mil
psi
  
TD: Break, 1.5 mil
psi
  
Tensile Elongation     ASTM D882
MD: Break, 1.5 mil
%
  
TD: Break, 1.5 mil
%
  
Elmendorf Tear Strength     ASTM D1922
MD: 0.98 mil
g
  
TD: 0.98 mil
g
  
Thermal
Nominal Value
Unit
Test Method
Brittleness Temperature
°F
 ASTM D746
Vicat Softening Temperature
°F
 ASTM D1525
Optical
Nominal Value
Unit
Test Method
Gloss (45°, 1.50 mil)
 
 ASTM D2457
Haze (1.50 mil)
%
 ASTM D1003
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Samsung Total 4220F, Samsung Total , SamsungTotal4220F, SamsungTotal, Total 4220 F, Total4220F, Total4220, Total, 4220 F, 4220F, Polyethylene, Linear Low Density, Polyethylene Linear Low Density, LLDPE, Polyethylene, PE, PolyethyleneLinearLowDensity, F4220, 4220Total
Features
Features may also be described by the following terms: Low Density, Low Specific Gravity, Good Heat Seal, Good Tear Strength, High Impact Resistance, Good Processability, Easy Processing, Low Slip.
Extrusion
Nominal Value
Unit
 
Cylinder Zone 1 Temp.
°F
  
Cylinder Zone 2 Temp.
°F
  
Cylinder Zone 3 Temp.
°F
  
Cylinder Zone 4 Temp.
°F
  
Cylinder Zone 5 Temp.
°F
  
Die Temperature
°F
  
Extrusion Notes
Blow up ratio: 1.0 to 2.0
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.