IDES Prospector Already have an account? Login Here

IDES

Samsung Total BI830

High Crystallinity Polypropylene

Supplied by SAMSUNG TOTAL PETROCHEMICALS Co., Ltd.

The technical datasheet with complete property values for Samsung Total BI830 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
SAMSUNG TOTAL BI830 is a highly isotactic block copolymer with high flowability, high strength, and high crystallinity compared to general PP, and is an RTPO (Reactor made Thermoplastic Polymer Olefin) with a high content of ethylene-propylene rubber. It shows an excellent balance of impact resistance (room temperature Izod NB) and strength due to high crystalline technology and the most appropriate rubber design. BI830 has high flowability due to its high melt index, making the product useful in automobile bumpers and the corresponding compound material for large scale parts.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
Features 
  • Block Copolymer
  • Crystalline
  • High Flow
  • High Heat Resistance
  • High Strength
  • Isophthalic
  • Low Temperature Impact Resistance
  • Ultra High Impact Resistance
Uses 
  • Appliances
  • Automotive Bumper
  • Automotive Instrument Panel
  • Automotive Interior Parts
  • Automotive Interior Trim
  • Food Containers
  • Household Goods
  • Outdoor Applications
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ASTM D1505
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ASTM D1238
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength (Yield)
psi
 ASTM D638
Tensile Elongation (Break)
%
 ASTM D638
Flexural Modulus
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact     ASTM D256
-4°F
ft·lb/in
  
73°F
ft·lb/in
  
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (R-Scale)
 
 ASTM D785
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (66 psi, Unannealed)
°F
 ASTM D648
Optical
Nominal Value
Unit
Test Method
Gloss
 
 ASTM D2457
Additional Information
Dupont Impact Strength, SAMSUNG TOTAL, -20°C: 500 kg/cm
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Samsung Total BI830, Samsung Total , SamsungTotalBI830, SamsungTotal, TotalBI 830, TotalBI830, Total, BI 830, BI830, Polypropylene, High Crystallinity, Polypropylene High Crystallinity, PP, High Crystal, PP High Crystal, Polypropylene, PP, PolypropyleneHighCrystallinity, PPHighCrystal, 830BI, 830TotalBI
Features
Features may also be described by the following terms: Block Copolymer, High Flow, High Melt, High MFI, Ultra High Impact Resistance, High Strength, High Heat Resistance, Low Temperatuer Impact Resistance, Low Temp Impact Resistance.
Uses
Uses may also be described by the following terms: Automotive Bumper, Automotive Bumpers, Automotive Instrument Panel, Automotive Dash Board, Household Goods, Housewares, Food Containers, Food Container.
Injection
Nominal Value
Unit
 
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Mold Temperature
°F
  
Injection Pressure
psi
  
Holding Pressure
psi
  
Injection Notes
Cooling Time: 25 to 40 sec
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.