IDES Prospector Already have an account? Login Here

IDES

Samsung Total BI970

High Crystallinity Polypropylene

Supplied by SAMSUNG TOTAL PETROCHEMICALS Co., Ltd.

The technical datasheet with complete property values for Samsung Total BI970 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
SAMSUNG TOTAL BI970 is a highly isotactic block copolymer with ultra-high flowability, high impact, and higher crystalinity compared to general PP. It maintains an optimum balance of strength and impact resistance due to high crystalline technology and the most appropriate rubber design. Through the control of molecular weight distribution, the product shows superior melt flow compared to normal PP and is appropriate for energy savings and multi-cavity injection molding. BI970 is useful in large scale thin products with low distortion tendencies and may also be used as a compound base resin.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
Features 
  • Block Copolymer
  • Crystalline
  • High Flow
  • High Heat Resistance
  • High Impact Resistance
  • High Strength
  • Isophthalic
  • Low Temperature Impact Resistance
  • Narrow Molecular Weight Distribution
Uses 
  • Automotive Bumper
  • Automotive Instrument Panel
  • Automotive Interior Trim
  • Containers
  • Cups
  • Film
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ASTM D1505
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ASTM D1238
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength (Yield)
psi
 ASTM D638
Tensile Elongation (Break)
%
 ASTM D638
Flexural Modulus
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (73°F)
ft·lb/in
 ASTM D256
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (R-Scale)
 
 ASTM D785
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (66 psi, Unannealed)
°F
 ASTM D648
Optical
Nominal Value
Unit
Test Method
Gloss
 
 ASTM D2457
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Samsung Total BI970, Samsung Total , SamsungTotalBI970, SamsungTotal, TotalBI 970, TotalBI970, Total, BI 970, BI970, Polypropylene, High Crystallinity, Polypropylene High Crystallinity, PP, High Crystal, PP High Crystal, Polypropylene, PP, PolypropyleneHighCrystallinity, PPHighCrystal, 970BI, 970TotalBI
Features
Features may also be described by the following terms: Block Copolymer, High Flow, High Melt, High MFI, High Impact Resistance, High Strength, Narrow Molecular Weight Distribution, Narrow MW Distribution, High Heat Resistance, Low Temperatuer Impact Resistance, Low Temp Impact Resistance.
Uses
Uses may also be described by the following terms: Automotive Bumper, Automotive Bumpers, Automotive Instrument Panel, Automotive Dash Board.
Injection
Nominal Value
Unit
 
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Mold Temperature
°F
  
Injection Pressure
psi
  
Holding Pressure
psi
  
Injection Notes
Cooling Time: 25 to 40 sec
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.