IDES Prospector Already have an account? Login Here

IDES

Samsung Total BI300

High Crystallinity Polypropylene

Supplied by SAMSUNG TOTAL PETROCHEMICALS Co., Ltd.

The technical datasheet with complete property values for Samsung Total BI300 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
SAMSUNG TOTAL BI300 is a high isotactic Block Copolymer which has higher crystallinity, compared to general PP. Due to high crystalline nature & optimum rubber design, BI300 has an excellent property balance between high stiffness and impact strength. Films made from this grade provide high heat resistance and superior mechanical strength, thus this grade is highly suited to retort pouch film application.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
Features 
  • Autoclavable
  • Block Copolymer
  • Crystalline
  • Good Dimensional Stability
  • Good Sterilizability
  • Good Surface Finish
  • High Heat Resistance
  • High Impact Resistance
  • High Stiffness
  • High Strength
  • Isophthalic
  • Low Temperature Impact Resistance
Uses 
  • Film
  • Food Packaging
  • Medical/Healthcare Applications
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ASTM D1238
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength 2 (Break)
psi
 ASTM D638
Tensile Elongation 2 (Break)
%
 ASTM D638
Flexural Modulus 2
psi
 ASTM D790
Films
Nominal Value
Unit
Test Method
Film Thickness - Tested
mil
  
Tensile Strength
     ASTM D882
MD: Yield, 2.4 mil
psi
  
TD: Yield, 2.4 mil
psi
  
MD: Break, 2.4 mil
psi
  
TD: Break, 2.4 mil
psi
  
Tensile Elongation
     ASTM D882
MD: Break, 2.4 mil
%
  
TD: Break, 2.4 mil
%
  
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact
     ASTM D256
32°F
ft·lb/in
  
41°F
ft·lb/in
  
73°F
ft·lb/in
  
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (R-Scale)
 
 ASTM D785
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (66 psi, Unannealed)
°F
 ASTM D648
Vicat Softening Temperature
°F
 ASTM D1525 3
Melting Temperature
°F
  
Optical
Nominal Value
Unit
Test Method
Haze (2.36 mil)
%
 ASTM D1003
Additional Information
Izod Impact Strength, ASTM D3420: 3000 kg-cm/cm
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Samsung Total BI300, Samsung Total , SamsungTotalBI300, SamsungTotal, TotalBI 300, TotalBI300, Total, BI 300, BI300, Polypropylene, High Crystallinity, Polypropylene High Crystallinity, PP, High Crystal, PP High Crystal, Polypropylene, PP, PolypropyleneHighCrystallinity, PPHighCrystal, 300BI, 300TotalBI
Features
Features may also be described by the following terms: Block Copolymer, High Heat Resistance, High Impact Resistance, High Stiffness, High Strength, Low Temperatuer Impact Resistance, Low Temp Impact Resistance, Good Dimensional Stability, Dimensionally Stable, Good Surface Finish, Good Starilizability, Sterilizable, Autoclavable, Autoclave.
Uses
Uses may also be described by the following terms: Food Packaging, Medical Applications.
Notes
1Typical properties: these are not to be construed as specifications.
22.0 in/min
3Loading 1 (10 N)
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.