IDES Prospector Already have an account? Login Here

IDES

RTP Compounds 105 SP (20% FOAMED)

Polypropylene

Glass Fiber Reinforcement, 30%

Supplied by RTP Company

The technical datasheet with complete property values for RTP Compounds 105 SP (20% FOAMED) is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Warning: The status of this material is 'Commercial: Limited Issue'

The data for this material has not been recently verified.
Please contact RTP Company for current information prior to specifying this grade.

This Series of materials is specially formulated to offer optimum physical properties for structural foam applications. They are designed for molding with the nitrogen or chemical blowing agent process. Values shown are based on 20% density reduction.
General  
Material Status 
  • Limited Issue
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • Latin America
  • North America
  • South America
Filler / Reinforcement 
  • Glass Fiber Reinforcement, 30% Filler by Weight
Features 
  • Foamable
RoHS Compliance 
Appearance 
  • Black
  • Natural Color
  
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Molding Shrinkage - Flow (0.125 in)
in/in
 ASTM D955
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ASTM D638
Tensile Strength (Yield)
psi
 ASTM D638
Tensile Elongation (Break)
%
 ASTM D638
Flexural Modulus
psi
 ASTM D790
Flexural Strength (Yield)
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (0.125 in)
ft·lb/in
 ASTM D256
Unnotched Izod Impact (0.125 in)
ft·lb/in
 ASTM D256
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
     ASTM D648
66 psi, Unannealed
°F
  
264 psi, Unannealed
°F
  
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL (0.0625 in, Values per RTP Company testing.)
 
 UL 94
Additional Information
Molding Shrinkage, Linear-Flow, ASTM D955, 6.35mm: 6mm/m.
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: RTP Compounds 105 SP, RTP Compounds 105 SP (20% FOAMED), RTP Compounds 105 SP 20 FOAMED, RTP Compounds , RTPCompounds105SP20FOAMED, RTPCompounds, Compounds105 SP, Compounds 105 SP 20 FOAMED, Compounds 105 SP, Compounds105 SP (20% FOAMED), Compounds105 SP 20 FOAMED, Compounds105, Compounds, 105 SP, Compounds105SP20FOAMED, Compounds105SP, 105 SP (20% FOAMED), 105 SP 20 FOAMED, 105SP, SP20, 20FOAMED, 105SP20FOAMED, Polypropylene, Unspecified, Polypropylene Unspecified, PP, Unspecified, PP Unspecified, Polypropylene, PP, RTP, PolypropyleneUnspecified, PPUnspecified, SP105, 105Compounds
Generic Name
Generic Name may also be described by the following terms: Polypropilene, Polypropelene.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Suggested Max Regrind
%
  
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Mold Temperature
°F
  
Injection Pressure
psi
  
Back Pressure
psi
  
Screw Speed
rpm
  
Clamp Tonnage
tons/in²
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.