IDES Prospector Already have an account? Login Here

IDES

TECHNYL STAR™ S 246 V35

Polyamide

Glass Fiber Reinforcement, 35%

Supplied by Rhodia Engineering Plastics SA

The technical datasheet with complete property values for TECHNYL STAR™ S 246 V35 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
TECHNYLSTAR TM Polyamide, reinforced with 35% of glass fibre, with high impact resistance, characterized by a high fluidity of the melt, for injection moulding. Having good mechanical properties, this grade is used in all sectors of industry. This product is available in colours on request.
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • North America
  • South America
Filler / Reinforcement 
  • Glass Fiber Reinforcement, 35% Filler by Weight
Features 
  • High Flow
  • High Impact Resistance
  
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183/A
Water Absorption (73°F, 24 hr)
%
 ISO 62
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2/1A
Tensile Stress (Break)
psi
 ISO 527-2/1A
Tensile Strain (Break)
%
 ISO 527-2/1A
Flexural Modulus
psi
 ISO 178
Flexural Strength
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
ft·lb/in²
 ISO 179/1eA
Charpy Unnotched Impact Strength
ft·lb/in²
 ISO 179/1eU
Notched Izod Impact Strength
ft·lb/in²
 ISO 180/1A
Unnotched Izod Impact Strength
ft·lb/in²
 ISO 180/1U
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (264 psi, Unannealed)
°F
 ISO 75-2/A
Melting Temperature
°F
  
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL (0.0630 in)
 
 UL 94
Additional Information
The value listed as Melting Temperature, ISO 3146, was tested in accordance with ISO 11357.
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: TECHNYL STAR™ S 246 V35, TECHNYL STAR S 246 V35, TECHNYL STAR™ , TECHNYL STAR, TECHNYLSTARS246V35, TECHNYLSTAR, S 246 V 35, S 246 V35, S246, 246V, V35, S246V35, Polyamide, Unspecified, Polyamide Unspecified, Nylon, Unspecified, Nylon Unspecified, Polyamide, Nylon, Rhodia, PolyamideUnspecified, NylonUnspecified, 246S
Features
Features may also be described by the following terms: High Impact Resistance, High Flow, High Melt, High MFI.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Suggested Max Moisture
%
  
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Mold Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.