Shincor LIM KE2001-50 Shincor Sil Silicone

Physical	Nominal Value	Unit	Test Method
Specific Gravity			ASTM D792
Molding Shrinkage - Flow		in/in	ASTM D955
Elastomers	Nominal Value	Unit	Test Method
Tensile Stress (100% Strain)		psi	ASTM D412
Tensile Strength (Yield)		psi	ASTM D412
Tensile Elongation (Break)		%	ASTM D412
Tear Strength		lbf/in	ASTM D624
Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore A)			ASTM D2240
Thermoset	Nominal Value	Unit	Test Method
Post Cure Time (302°F)		hr
Additional Information
Compression Set, ASTM D395, 22 hr, 302°F, Specimen post-cured 1 hr at 302°F: 29% Compression Set, ASTM D395, 22 hr, 302°F, Specimen post-cured 4 hrs at 392°F: 5% Viscosity, Part A: 1000 Pa.s Viscosity, Part B: 1000 Pa.s Cure Rate, ODR, 302°F, T10: 20 sec Cure Rate, ODR, 302°F, T90: 30 sec Press Cure, 5 min at 248°F
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Shincor LIM KE2001-50, Shincor LIM KE200150, Shincor LIM , ShincorLIMKE200150, ShincorLIM, KE 2001, LIMKE 2001 50, LIMKE 2001, LIMKE2001-50, LIMKE200150, LIMKE2001:50, LIMKE2001/50, LIMKE2001+50, LIMKE2001_50, LIMKE2001 50, LIMKE2001, KE 2001 50, KE2001-50, KE200150, KE2001:50, KE2001/50, KE2001+50, KE2001_50, KE2001 50, KE2001, 200150, Silicone, Shincor Sil, 2001KE, 2001LIMKE
Features
Features may also be described by the following terms: Fast Cure, Fast Curing.

Notes

¹Typical properties: these are not to be construed as specifications.

Shincor LIM KE2001-50