Adell PC DS-10 Adell Polycarbonate

Physical	Nominal Value	Unit	Test Method
Specific Gravity			ASTM D792
Melt Mass-Flow Rate (MFR) (300°C/1.2 kg)		g/10 min	ASTM D1238
Molding Shrinkage - Flow		in/in	ASTM D955
Water Absorption (24 hr)		%	ASTM D570
Mechanical	Nominal Value	Unit	Test Method
Tensile Strength		psi	ASTM D638
Tensile Elongation (Break)		%	ASTM D638
Flexural Modulus		psi	ASTM D790
Flexural Strength		psi	ASTM D790
Impact	Nominal Value	Unit	Test Method
Notched Izod Impact (73°F, 0.125 in)		ft·lb/in	ASTM D256
Hardness	Nominal Value	Unit	Test Method
Rockwell Hardness (M-Scale)			ASTM D785
Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load			ASTM D648
66 psi, Unannealed		°F
264 psi, Unannealed		°F
Additional Information
Available in lubricated and release grades. Other melt flow grades available. Melt Flow Rate, ASTM D1238, 300°C/1.2 kg: 9 to 11 g/10 min
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Adell PC DS-10, Adell PC DS10, Adell PC , AdellPCDS10, AdellPC, DS, PCDS-10, PCDS10, PCDS:10, PCDS/10, PCDS+10, PCDS_10, PCDS 10, PCDS, DS-10, DS10, DS:10, DS/10, DS+10, DS_10, DS 10, Polycarbonate, PC, Adell, 10DS, 10PCDS
Automotive Specifications
This plastic material has approval for 1 automotive specifications from the following agencies (the number in parentheses shows the number of specifications for that agency): GM-FishBod (1).

Notes

¹Typical properties: these are not to be construed as specifications.

Adell PC DS-10