IDES Prospector Already have an account? Login Here

IDES

Duracon EB-08

Acetal (POM) Copolymer

Carbon Powder, 10%

Supplied by Polyplastics Co., Ltd.

The technical datasheet with complete property values for Duracon EB-08 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
Filler / Reinforcement 
  • Carbon Powder, 10% Filler by Weight
Additive 
  • Antistatic
Features 
  • Antistatic
  • Electrically Conductive
  
Automotive Specifications 
Part Marking Code (ISO 11469)
  • >POM-CD10<
Physical
Nominal Value
Unit
Test Method
Specific Gravity
      
--
 
 ASTM D792
--
g/cm³
 ISO 1183
Mechanical
Nominal Value
Unit
Test Method
Tensile Stress
      
Yield
psi
 ISO 527-2
--
psi
 ASTM D638
Tensile Elongation
      
Break
%
 ASTM D638
Break
%
 ISO 527-2
Flexural Modulus
      
--
psi
 ASTM D790
--
psi
 ISO 178
Flexural Strength
      
--
psi
 ASTM D790
--
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
ft·lb/in²
 ISO 179/1eA
Notched Izod Impact
ft·lb/in
 ASTM D256
Reverse Notch Izod Impact
ft·lb/in
 ASTM D256
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
      
264 psi, Unannealed
°F
 ASTM D648
264 psi, Unannealed
°F
 ISO 75-2/A
CLTE
      
Flow
in/in/°F
 ASTM D696
Flow: 73 to 131°F
in/in/°F
 ISO 11359-2
Transverse
in/in/°F
 ASTM D696
Transverse: 73 to 131°F
in/in/°F
 ISO 11359-2
Electrical
Nominal Value
Unit
Test Method
Surface Resistivity
ohms
 IEC 60093
Volume Resistivity
      
0.118 in
ohm·cm
 ASTM D257
--
ohm·cm
 IEC 60093
Additional Information
Nominal Value
Unit
Test Method
Color Number
 
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Duracon EB-08, Duracon EB08, Duracon , DuraconEB08, EB, EB-08, EB08, EB:08, EB/08, EB+08, EB_08, EB 08, Acetal Copolymer, Acetal Copolymer, Acetal (POM) Copolymer, Acetal POM Copolymer, Acetal, pom, Polyplastics, AcetalPOMCopolymer, 08EB
Features
Features may also be described by the following terms: Electrically Conductive, Conducts Electricity, Conductive.
Automotive Specifications
This plastic material has approval for 1 automotive specifications from the following agencies (the number in parentheses shows the number of specifications for that agency): CHRYSLER (1).
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.