IDES Prospector Already have an account? Login Here

IDES

Fortron® 1130A1

Polyphenylene Sulfide

Glass Fiber Reinforcement, 30%

Supplied by Polyplastics Co., Ltd.

The technical datasheet with complete property values for Fortron® 1130A1 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
Filler / Reinforcement 
  • Glass Fiber Reinforcement, 30% Filler by Weight
Features 
  • Ultra High Toughness
Part Marking Code (ISO 11469)
  • >PPS-GF30<
Physical
Nominal Value
Unit
Test Method
Specific Gravity
      
--
 
 ASTM D792
--
g/cm³
 ISO 1183
Molding Shrinkage
      
Flow: 0.0787 in
in/in
 ASTM D955
Across Flow: 0.0787 in
in/in
 ASTM D955
Across Flow: 0.0787 in
%
 ISO 11443
Flow: 0.0787 in
%
 ISO 11443
Water Absorption (73°F, 24 hr)
%
 ASTM D570, ISO 62
Mechanical
Nominal Value
Unit
Test Method
Tensile Stress
      
Yield
psi
 ISO 527-2
--
psi
 ASTM D638
Tensile Elongation
      
Break
%
 ASTM D638
Break
%
 ISO 527-2
Flexural Modulus
      
--
psi
 ASTM D790
--
psi
 ISO 178
Flexural Strength
      
--
psi
 ASTM D790
--
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
ft·lb/in²
 ISO 179/1eA
Notched Izod Impact
ft·lb/in
 ASTM D256
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
      
264 psi, Unannealed
°F
 ASTM D648
264 psi, Unannealed
°F
 ISO 75-2/A
CLTE
     ASTM D696
Flow
in/in/°F
  
Transverse
in/in/°F
  
Electrical
Nominal Value
Unit
Test Method
Volume Resistivity
      
0.118 in
ohm·cm
 ASTM D257
--
ohm·cm
 IEC 60093
Dielectric Strength
      
0.118 in
V/mil
 ASTM D149
0.118 in
V/mil
 IEC 60243-1
Dielectric Constant
     IEC 60250
1 kHz
 
  
1 MHz
 
  
Dissipation Factor
     IEC 60250
1 kHz
 
  
1 MHz
 
  
Comparative Tracking Index
V
 IEC 60112, ASTM D3638
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL
 
 UL 94
UL File Number
 
  
Fill Analysis
Nominal Value
Unit
Test Method
Melt Viscosity
      
590°F, 1000 sec^-1
Pa·s
 ISO 11443
590°F, 1000 sec^-1
Pa·s
 ASTM D3835
Additional Information
Nominal Value
Unit
Test Method
Color Number
 
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Fortron® 1130A1, Fortron 1130A1, Fortron® , Fortron, Fortron1130A1, 1130 A 1, 1130A1, 1130A, A1, Polyphenylene Sulfide, PPS, Polyplastics, PolyphenyleneSulfide, A1130
Features
Features may also be described by the following terms: Ultra High Toughness.
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.