IDES Prospector Already have an account? Login Here

IDES

Fortron® 1150A64

Polyphenylene Sulfide

Glass Fiber\Glass Flake, 50%

Supplied by Polyplastics Co., Ltd.

The technical datasheet with complete property values for Fortron® 1150A64 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
Filler / Reinforcement 
  • Glass Fiber\Glass Flake, 50% Filler by Weight
Features 
  • Low Warpage
Part Marking Code (ISO 11469)
  • >PPS-(GF+GS)50<
Physical
Nominal Value
Unit
Test Method
Specific Gravity
     
--
 
ASTM D792
--
g/cm³
ISO 1183
Molding Shrinkage
    ASTM D955
Flow: 0.0787 in
in/in
 
Across Flow: 0.0787 in
in/in
 
Water Absorption
     
73°F, 24 hr
%
ASTM D570
73°F, 24 hr
%
ISO 62
Mechanical
Nominal Value
Unit
Test Method
Tensile Stress
     
Yield
psi
ISO 527-2
--
psi
ASTM D638
Tensile Elongation (Break)
%
ASTM D638, ISO 527-2
Flexural Modulus
     
--
psi
ASTM D790
--
psi
ISO 178
Flexural Strength
     
--
psi
ASTM D790
--
psi
ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
ft·lb/in²
ISO 179/1eA
Notched Izod Impact
ft·lb/in
ASTM D256
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (264 psi, Unannealed)
°F
ASTM D648, ISO 75-2/A
CLTE
     
Flow
in/in/°F
ASTM D696
Flow
in/in/°F
ISO 11359-2
Transverse
in/in/°F
ASTM D696, ISO 11359-2
Electrical
Nominal Value
Unit
Test Method
Volume Resistivity
     
0.118 in
ohm·cm
ASTM D257
--
ohm·cm
IEC 60093
Dielectric Strength
     
0.118 in
V/mil
ASTM D149
0.118 in
V/mil
IEC 60243-1
Dielectric Constant
    ASTM D150, IEC 60250
1 kHz
 
 
1 MHz
 
 
Dissipation Factor
    ASTM D150, IEC 60250
1 kHz
 
 
1 MHz
 
 
Arc Resistance
sec
 
Comparative Tracking Index
V
IEC 60112, ASTM D3638
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL
 
UL 94
UL File Number
 
 
Fill Analysis
Nominal Value
Unit
Test Method
Melt Viscosity
     
590°F, 1000 sec^-1
Pa·s
ISO 11443
590°F, 1000 sec^-1
Pa·s
ASTM D3835
Additional Information
Nominal Value
Unit
Test Method
Color Number
 
 
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Fortron® 1150A64, Fortron 1150A64, Fortron® , Fortron, Fortron1150A64, 1150 A 64, 1150A64, 1150A, A64, Polyphenylene Sulfide, PPS, Polyplastics, PolyphenyleneSulfide, A1150
Features
Features may also be described by the following terms: Low Warpage, Low Warp.
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.