Techno MUH BM5602 Techno Polymer Acrylonitrile Butadiene Styrene

General

Material Status

Availability

Features

Forms

Processing Method

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ASTM D1505
Melt Mass-Flow Rate (MFR) (220°C/10.0 kg)		g/10 min	ASTM D1238
Molding Shrinkage - Flow (73°F)		in/in	ASTM D955
Mechanical	Nominal Value	Unit	Test Method
Tensile Strength (Yield, 73°F)		psi	ASTM D638
Tensile Elongation (Yield, 73°F)		%	ASTM D638
Flexural Modulus (73°F)		psi	ASTM D790
Flexural Strength (73°F)		psi	ASTM D790
Impact	Nominal Value	Unit	Test Method
Notched Izod Impact			ASTM D256
-22°F, 0.126 in		ft·lb/in
-22°F, 0.252 in		ft·lb/in
73°F, 0.126 in		ft·lb/in
73°F, 0.252 in		ft·lb/in
Hardness	Nominal Value	Unit	Test Method
Rockwell Hardness (R-Scale)			ASTM D785
Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load			ASTM D648
66 psi, Unannealed		°F
264 psi, Unannealed		°F
CLTE - Flow		in/in/°F	ASTM D696
Flammability	Nominal Value	Unit	Test Method
UL File Number
Additional Information
CLTE, Flow ,ASTM D696: 6 to 8 cm^-5/cm/°C
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Techno MUH BM5602, Techno MUH , TechnoMUHBM5602, TechnoMUH, MUHBM 5602, MUHBM5602, MUH, BM 5602, BM5602, Acrylonitrile Butadiene Styrene, ABS, Techno Polymer, AcrylonitrileButadieneStyrene, 5602BM, 5602MUHBM
Features
Features may also be described by the following terms: High Heat Resistance, Good Moldability.

Injection	Nominal Value	Unit
Rear Temperature		°F
Middle Temperature		°F
Front Temperature		°F
Nozzle Temperature		°F
Processing (Melt) Temp		°F
Mold Temperature		°F
Injection Rate
Screw Speed		rpm
Injection Notes
Injection Pressure: High Retention Pressure: Low to Medium

Notes

¹Typical properties: these are not to be construed as specifications.

Techno MUH BM5602