Celstran PA66-GF50-0112P7,5/10 Ticona Polyamide 66/6 Copolymer (Long Glass Fiber, 50%)

Product Description

Material code according to ISO 1043-1: PA66

Nylon 66/6 Copolymer reinforced by 50 weight percent long glass
fibers. The pellets are cylindrical and normally as well as the
embedded fibers 7.5 mm long.

Parts molded of CELSTRAN have outstanding mechanical properties such
as high strength and stiffness combined with high heat deflection.
The notched impact strength is increased at elevated and low
temperatures due to the fiber skeleton built in the parts. The long
fiber reinforcement reduces creep significantly.

The very isotropic shrinkage in the molded parts minimizes the
warpage.

Complex parts can be manufactured with high reproducibility by
injection molding.

Can be used for substituting die cast metal with the advantage of
Weight reduction, no corrosion problems, no post treatment.

General

Material Status

Commercial: Active

Availability

Europe

Filler / Reinforcement

Long Glass Fiber, 50% Filler by Weight

Additive

UV Stabilizer

Features

Good Weather Resistance

High Heat Resistance

High Stiffness

High Strength

Low Warpage

Uses

Metal Replacement

RoHS Compliance

Processing Method

Injection Molding

Resin ID (ISO 1043)

PA66

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183
Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus
--		psi	ISO 527-2/1A/1
176°F		psi	ISO 527-2
Tensile Stress (Break)		psi	ISO 527-2/1A/5
Tensile Strain
Break		%	ISO 527-2/1A/5
Break, 176°F		%	ISO 527-2
Flexural Modulus (73°F)		psi	ISO 178
Flexural Strength			ISO 178
176°F		psi
73°F		psi
Tensile Strength (176°F)		psi	ISO 527-2
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength			ISO 179/1eA
-22°F		ft·lb/in²
73°F		ft·lb/in²
Charpy Unnotched Impact Strength			ISO 179/1eU
-22°F		ft·lb/in²
73°F		ft·lb/in²
Unnotched Izod Impact Strength			ISO 180/1U
-22°F		ft·lb/in²
73°F		ft·lb/in²
Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature
264 psi, Unannealed		°F	ISO 75-2/A
1160 psi, Unannealed		°F	ISO 75-2/C
Melting Temperature²		°F	ISO 11357-3
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Celstran® PA66-GF50-0112P7,5/10, Celstran PA66GF500112P7510, Celstran® , Celstran, CelstranPA66GF500112P7510, PA 66, PA 66 GF 50 0112 P 7 5 10, PA66-GF50-0112P7,5/10, PA66GF500112P7510, PA66-GF50-0112P7,5:10, PA66-GF50-0112P7,5+10, PA66-GF50-0112P7,5-10, PA66-GF50-0112P7,5_10, PA66-GF50-0112P7,5 10, PA66:GF50:0112P7,5/10, PA66/GF50/0112P7,5/10, PA66+GF50+0112P7,5/10, PA66_GF50_0112P7,5/10, PA66 GF50 0112P7,5/10, PA66, 66GF, GF50, 500112, 0112P, P7, 75, 510, PA66GF500112P75_10, PA66GF500112P75 10, PA66_GF50_0112P7510, PA66 GF50 0112P7510, Polyamide 66/6 Copolymer, Polyamide 666 Copolymer, Polyamide 66:6 Copolymer, Polyamide 66+6 Copolymer, Polyamide 66-6 Copolymer, Polyamide 66_6 Copolymer, Polyamide 66 6 Copolymer, Nylon 66/6, Nylon 666, Nylon 66:6, Nylon 66+6, Nylon 66-6, Nylon 66_6, Nylon 66 6, Polyamide, Nylon, pa666, Ticona, Polyamide666Copolymer, Nylon666, Polyamide66_6Copolymer, Nylon66_6, 66PA
Generic Name
Generic Name may also be described by the following terms: PA666, PA66/6.
Features
Features may also be described by the following terms: High Heat Resistance, High Strength, Low Warpage, Low Warp, High Stiffness, Good Weather Resistance, Weather Resistant.

Notes

¹Typical properties: these are not to be construed as specifications.

²10°C/min

Celstran® PA66-GF50-0112P7,5/10

Polyamide 66/6 Copolymer

Long Glass Fiber, 50%

Supplied by Ticona