IDES Prospector Already have an account? Login Here

IDES

Celstran® PA66-GF60-0104P10/11

Polyamide 66/6 Copolymer

Long Glass Fiber, 60%

Supplied by Ticona

The technical datasheet with complete property values for Celstran® PA66-GF60-0104P10/11 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
60 % long glas fiber reinforced PA 66 with improved demolding properties
Material code according to ISO 1043-1: PA66

Nylon 66/6 copolymer reinforced by 60 weight percent long glass
fibers with improved demolding propertiesThe pellets are cylindrical and normally as well as the
embedded fibers 10 mm long.

Parts molded of CELSTRAN have outstanding mechanical properties such
as high strength and stiffness combined with high heat deflection.
The notched impact strength is increased at elevated and low
temperatures due to the fiber skeleton built in the parts. The long
fiber reinforcement reduces creep significantly.

The very isotropic shrinkage in the molded parts minimizes the
warpage.

Complex parts can be manufactured with high reproducibility by
injection molding.

Can be used for substituting die cast metal with the advantage of
Weight reduction, no corrosion problems, no post treatment
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Filler / Reinforcement 
  • Long Glass Fiber, 60% Filler by Weight
Features 
  • Good Creep Resistance
  • High Heat Resistance
  • High Stiffness
  • High Strength
  • Low Warpage
Uses 
  • Metal Replacement
RoHS Compliance 
Processing Method 
  • Injection Molding
Resin ID (ISO 1043)
  • PA66
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Viscosity Number
cm³/g
 ISO 307
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
      
--
psi
 ISO 527-2/1A/1
176°F
psi
 ISO 527-2
Tensile Stress (Break)
psi
 ISO 527-2/1A/5
Tensile Strain
      
Break
%
 ISO 527-2/1A/5
Break, 176°F
%
 ISO 527-2
Flexural Modulus
     ISO 178
73°F
psi
  
176°F
psi
  
Flexural Strength
     ISO 178
176°F
psi
  
73°F
psi
  
Tensile Strength (176°F)
psi
 ISO 527-2
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
     ISO 179/1eA
-22°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Charpy Unnotched Impact Strength
     ISO 179/1eU
-22°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Unnotched Izod Impact Strength
     ISO 180/1U
-22°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Multi-Axial Instrumented Impact Energy (-22°F)
ft·lb
 ISO 6603-2
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature
      
264 psi, Unannealed
°F
 ISO 75-2/A
1160 psi, Unannealed
°F
 ISO 75-2/C
Melting Temperature 2
°F
 ISO 11357-3
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Celstran® PA66-GF60-0104P10/11, Celstran PA66GF600104P1011, Celstran® , Celstran, CelstranPA66GF600104P1011, PA 66, PA 66 GF 60 0104 P 10 11, PA66-GF60-0104P10/11, PA66GF600104P1011, PA66-GF60-0104P10:11, PA66-GF60-0104P10+11, PA66-GF60-0104P10-11, PA66-GF60-0104P10_11, PA66-GF60-0104P10 11, PA66:GF60:0104P10/11, PA66/GF60/0104P10/11, PA66+GF60+0104P10/11, PA66_GF60_0104P10/11, PA66 GF60 0104P10/11, PA66, 66GF, GF60, 600104, 0104P, P10, 1011, PA66GF600104P10_11, PA66GF600104P10 11, PA66_GF60_0104P1011, PA66 GF60 0104P1011, Polyamide 66/6 Copolymer, Polyamide 666 Copolymer, Polyamide 66:6 Copolymer, Polyamide 66+6 Copolymer, Polyamide 66-6 Copolymer, Polyamide 66_6 Copolymer, Polyamide 66 6 Copolymer, Nylon 66/6, Nylon 666, Nylon 66:6, Nylon 66+6, Nylon 66-6, Nylon 66_6, Nylon 66 6, Polyamide, Nylon, pa666, Ticona, Polyamide666Copolymer, Nylon666, Polyamide66_6Copolymer, Nylon66_6, 66PA
Generic Name
Generic Name may also be described by the following terms: PA666, PA66/6.
Features
Features may also be described by the following terms: High Heat Resistance, High Strength, Low Warpage, Low Warp, High Stiffness, Good Creep Resistance, Creep Resistant.
Notes
1Typical properties: these are not to be construed as specifications.
210°C/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.