IDES Prospector Already have an account? Login Here

IDES

TAISOX 7501

High Density Polyethylene

Supplied by Formosa Chemicals & Fibre Corporation

The technical datasheet with complete property values for TAISOX 7501 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
Features 
  • Good Chemical Resistance
  • Good Stiffness
  • High Density
  • High ESCR (Stress Crack Resist.)
  • High Impact Resistance
  • High Rigidity
Uses 
  • Drums
  • Industrial Containers
  • Tanks
Forms 
  • Pellets
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ASTM D1505
Melt Mass-Flow Rate (MFR)
     ASTM D1238
190°C/2.16 kg
g/10 min
  
190°C/21.6 kg
g/10 min
  
190°C/5.0 kg
g/10 min
  
Environmental Stress-Cracking Resistance
hr
 ASTM D1693
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength
     ASTM D638
Yield
psi
  
Break
psi
  
Tensile Elongation (Break)
%
 ASTM D638
Impact
Nominal Value
Unit
Test Method
Tensile Impact Strength
ft·lb/in²
 ASTM D1822
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore D)
 
 ASTM D2240
Thermal
Nominal Value
Unit
Test Method
Brittleness Temperature
°F
 ASTM D746
Vicat Softening Temperature
°F
 ASTM D1525
Melting Temperature
°F
  
Additional Information
Notched Izod Impact Strength, ASTM D256: No Break kg-cm/cm²
Die Swell Ratio, FPC Method: 1.75
Pich-off thickness, FPC Method: Excellent
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: TAISOX 7501, TAISOX , TAISOX7501, 7501, Polyethylene, High Density, Polyethylene High Density, HDPE, Polyethylene, PE, Formosa Chemicals, PolyethyleneHighDensity
Features
Features may also be described by the following terms: High Density, High Specific Gravity, High Rigidity, Good Stiffness, High Impact Resistance, High Environmental Stress Cracking Resistance, High ESCR, Stress Cracking Resistant, Good Chemical Resistance, Chemical Resistant.
Uses
Uses may also be described by the following terms: Industrial Containers, Industrial Containers.
Injection
Nominal Value
Unit
 
Processing (Melt) Temp
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.