ADDILENE H 520 M40 Addiplast Polypropylene Homopolymer (Mineral Filler, 40%)

General

Material Status

Availability

Filler / Reinforcement

Uses

Forms

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183/A
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)		g/10 min	ISO 1133
Mechanical	Nominal Value	Unit	Test Method
Tensile Stress			ISO 527-2
Yield		psi
Break		psi
Tensile Strain (Break)		%	ISO 527-2
Flexural Modulus		psi	ISO 178
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength		ft·lb/in²	ISO 179/1eA
Charpy Unnotched Impact Strength		ft·lb/in²	ISO 179/1eU
Notched Izod Impact Strength		ft·lb/in²	ISO 180/1A
Hardness	Nominal Value	Unit	Test Method
Shore Hardness (Shore D)			ISO 868
Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature (264 psi, Unannealed)		°F	ISO 75-2/Af
Vicat Softening Temperature		°F	ISO 306/A50
Melting Temperature (DSC)		°F	ISO 3146
Electrical	Nominal Value	Unit	Test Method
Surface Resistivity		ohms	IEC 60093
Volume Resistivity		ohm·cm	IEC 60093
Comparative Tracking Index (Solution A)		V	IEC 60112
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: ADDILENE H 520 M40, ADDILENE , ADDILENEH520M40, H 520 M 40, H 520 M40, H520, 520M, M40, H520M40, Polypropylene Homopolymer, PP Homopolymer, Polypropylene, PP, Addiplast, PolypropyleneHomopolymer, PPHomopolymer, 520H
Uses
Uses may also be described by the following terms: Automotive Applications, Automotive Sector, Appliance Components, Appliance Parts.

Notes

¹Typical properties: these are not to be construed as specifications.

ADDILENE H 520 M40