IDES Prospector Already have an account? Login Here

IDES

EMERGE™ PC 8702-15 (AP)

Advanced Resin

Glass Fiber Reinforcement, 20%

Supplied by Styron LLC

The technical datasheet with complete property values for EMERGE™ PC 8702-15 (AP) is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
EMERGE™ PC 8702 Advanced Resin is an ignition-resistant, 20% glass reinforced, polycarbonate resin. This resin contains no bromine, chlorine, or phosphate additives. The resin is designed to meet the German norm DIN VDE-0472/Part 815 (1989) on halogens. It is a medium flow PC resin with a mold release system, intended for injection molding applications.

Applications:
  • Information technology equipment
  • Electrical parts
  • Other structural/internal parts
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
Filler / Reinforcement 
  • Glass Fiber Reinforcement, 20% Filler by Weight
Additive 
  • Flame Retardant
  • Mold Release
  
Agency Ratings 
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Melt Mass-Flow Rate (MFR) (300°C/1.2 kg)
g/10 min
 ASTM D1238
Molding Shrinkage - Flow
in/in
 ASTM D955
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus (0.126 in, Injection Molded)
psi
 ASTM D638
Tensile Strength (Break, 0.126 in, Injection Molded)
psi
 ASTM D638
Tensile Elongation (Break, 0.126 in, Injection Molded)
%
 ASTM D638
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (73°F, 0.126 in, Injection Molded)
ft·lb/in
 ASTM D256
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
     ASTM D648
66 psi, Unannealed
°F
  
264 psi, Unannealed
°F
  
264 psi, Annealed
°F
  
Electrical
Nominal Value
Unit
Test Method
Surface Resistivity
ohms
 ASTM D257
Volume Resistivity (0.0709 in)
ohm·cm
 ASTM D257
Dielectric Strength (0.0630 in)
V/mil
 ASTM D149
Dielectric Constant (0.0630 in, 1 MHz)
 
 ASTM D150
Comparative Tracking Index (0.118 in)
V
 IEC 60112
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL 2 (0.0591 in)
 
 UL 94
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: EMERGE™ PC 8702-15, EMERGE PC 8702 15, EMERGE™ PC 8702-15 (AP), EMERGE PC 870215 AP, EMERGE™ , EMERGE, EMERGEPC870215AP, PC 870215, PC 8702, PC 8702-15, PC 8702 15, PC870215, PC 8702-15 (AP), PC 870215 AP, PC 8702:15 (AP), PC 8702:15, PC 8702/15 (AP), PC 8702/15, PC 8702+15 (AP), PC 8702+15, PC 8702_15 (AP), PC 8702_15, PC 8702 15 (AP), PC8702, 870215, 15AP, PC8702_15, PC870215AP, PC 8702_15 AP, PC 8702 15 AP, PC8702_15AP, Polycarbonate, PC, Styron, 8702PC
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): DIN (1).
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
2This rating not intended to reflect hazards presented by this or any other material under actual fire conditions.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.