IDES Prospector Already have an account? Login Here

IDES

EMERGE™ PC/ABS 7350

Advanced Resin

Supplied by Styron LLC

The technical datasheet with complete property values for EMERGE™ PC/ABS 7350 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
EMERGE™ PC/ABS 7350 advanced resin is a high flow and high toughness PC/ABS alloy. It is designed for thin wall application with high heat requirement.

Applications:
  • Mobile phone and PDA housing
  • Sporting goods
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
Forms 
  • Pellets
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Melt Mass-Flow Rate (MFR)
     ASTM D1238
230°C/3.8 kg
g/10 min
  
260°C/5.0 kg
g/10 min
  
Molding Shrinkage - Flow
in/in
 ASTM D955
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength (Yield, 0.126 in, Injection Molded)
psi
 ASTM D638
Tensile Elongation (Break, 0.126 in, Injection Molded)
%
 ASTM D638
Flexural Modulus (0.126 in, Injection Molded)
psi
 ASTM D790
Flexural Strength (0.126 in, Injection Molded)
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (73°F, 0.126 in, Injection Molded)
ft·lb/in
 ASTM D256
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
     ASTM D648
66 psi, Annealed, 0.126 in
°F
  
264 psi, Unannealed, 0.126 in
°F
  
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL 2
     UL 94
0.0394 in
 
  
0.126 in
 
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: EMERGE™ PC/ABS 7350, EMERGE PCABS 7350, EMERGE™ , EMERGE, EMERGEPCABS7350, PC, PC/ABS 7350, PCABS 7350, PC:ABS 7350, PC+ABS 7350, PC-ABS 7350, PC_ABS 7350, PC ABS 7350, PCABS, ABS7350, PCABS7350, PC_ABS7350, Acrylonitrile Butadiene Styrene + PC, Acrylonitrile Butadiene Styrene PC, Acrylonitrile Butadiene Styrene : PC, Acrylonitrile Butadiene Styrene / PC, Acrylonitrile Butadiene Styrene - PC, Acrylonitrile Butadiene Styrene _ PC, Acrylonitrile Butadiene Styrene PC, ABS+PC, ABS:PC, ABS/PC, ABS-PC, ABS_PC, ABS PC, Acrylonitrile Butadiene Styrene, ABS, Styron, AcrylonitrileButadieneStyrenePC, AcrylonitrileButadieneStyrene, AcrylonitrileButadieneStyrene_PC, ABSPC
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Nozzle Temperature
°F
  
Mold Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
2This rating not intended to reflect hazards presented by this or any other material under actual fire conditions.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.