IDES Prospector Already have an account? Login Here

IDES

CONTINUUM™ DGDA-2492 NT

Bimodal Polyethylene Resin

Supplied by The Dow Chemical Company

The technical datasheet with complete property values for CONTINUUM™ DGDA-2492 NT is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
CONTINUUM™ DGDA-2492 NT Bimodal Polyethylene Resin is produced using UNIPOL™ II process technology. This product may be utilized for pipe applications where long-term hydrostatic strength combined with outstanding resistance to slow crack growth, rapid crack propagation, and high melt strength is desired. Suitable applications include natural gas distribution pipes, large diameter industrial piping, mining, sewage, and municipal water service lines.

Industrial Standards Compliance:
ASTM D 3350: cell classification
  • Natural - PE445576A (MRS)
  • Black - PE445576C (MRS) (See NOTES 1)
  • Natural - PE445574A (HDB)
  • Black - PE445574C (HDB) (See NOTES 1)
Plastics Pipe Institute (PPI): TR-4:
  • Black Pipe - CONTINUUM™ DGDA-2492 BK (See NOTES 1)
    • ISO PE100 pipe grade - MRS 10 @ 20°C; CRS 6.3 @ 60°C, 11 yr
    • ASTM PE4710 pipe grade - 1600psi HDB and 1000psi HDS @ 73°F, and 1000psi HDB @ 140°F
NSF International: Standard 14 and 61
  • Black Pipe - DGDA-2492 Black (See NOTES 2)
Consult the regulations for complete details.

NOTES:
(1) The first five numbers of the cell classification are based on natural resin. The last number and letter are based on black resin (natural resin plus 6.5% DFNF-0092).
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • North America
  
Additive 
  • Processing Aid
Agency Ratings 
Forms 
  • Pellets
Processing Method 
  • Profile Extrusion
Physical
Nominal Value
Unit
Test Method
Density
     ASTM D1505
Natural
g/cm³
  
Black 2
g/cm³
  
Melt Mass-Flow Rate (MFR)
     ASTM D1238
190°C/2.16 kg
g/10 min
  
190°C/21.6 kg
g/10 min
  
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength 3 (Yield)
psi
 ASTM D638
Tensile Elongation 3 (Break)
%
 ASTM D638
Flexural Modulus 4, 3
psi
 ASTM D790B
Creep Rupture Strength - 1798 psi (12.4 MPa) (68°F)
day
 ISO 1167
Hydrostatic Strength
     ISO 4427
1798 psi (12.4 MPa): 68°F
day
  
725 psi (5.0 MPa): 176°F
day
  
Resistance to Rapid Crack Propagation, Pc
      
Calculated, Full Scale: 32°F 5
psi
 ISO 13478
S-4: 32°F 6
psi
 ISO 13477
Resistance to Rapid Crack Propagation, Tc - S-4 @ 12 bar 6
°F
 ISO 13477
Slow Crack Growth PENT 3
yr
 ASTM F1473
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact 3 (73°F)
ft·lb/in
 ASTM D256A
Thermal
Nominal Value
Unit
Test Method
Brittleness Temperature 3
°F
 ASTM D746A
Thermal Stability
°F
 ASTM D3350
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: CONTINUUM™ DGDA-2492 NT, CONTINUUM DGDA2492 NT, CONTINUUM™ , CONTINUUM, CONTINUUMDGDA2492NT, DGDA, DGDA-2492 NT, DGDA2492 NT, DGDA:2492 NT, DGDA/2492 NT, DGDA+2492 NT, DGDA_2492 NT, DGDA 2492 NT, DGDA2492, 2492NT, DGDA2492NT, DGDA_2492NT, Polyethylene, High Density, Polyethylene High Density, HDPE, Polyethylene, PE, Dow, PolyethyleneHighDensity, 2492DGDA
Agency Ratings
This plastic material has 9 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): ASTM (5), ISO (1), NSF (2), PPI (1).
Notes
1Typical properties: these are not to be construed as specifications.
2Natural resin extruded under proper conditions with carbon black masterbatch DFNF-0092 (6.5%).
3Compression molded parts prepared according to ASTM D 4703 Procedure C unless otherwise noted in the test method. Properties will vary with changes in molding conditions and aging time.
4Method I (3 point load)
5Calculated value, determined by the equation in ISO 4437 based on S-4 test data. Pipe diameter of 10 inch IPS (25.4 cm) and Standard Diameter Ratio (SDR) 11.
6Pipe diameter of 10 inch IPS (25.4 cm) and Standard Diameter Ratio (SDR) 11.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.