IDES Prospector Already have an account? Login Here

IDES

INSPIRE™ 137 (Blow Molding Extrusion)

Polypropylene

Supplied by Braskem Europe GmbH

The technical datasheet with complete property values for INSPIRE™ 137 (Blow Molding Extrusion) is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
INSPIRE™ 137 Performance Polymer is an impact copolymer, primarily designed for film extrusion and suitable for blow moulding where high mechanical properties are of the highest importance.

INSPIRE 137 Performance Polymer is a high molecular weight, high impact copolymer with a broad molecular weight distribution.

Applications for INSPIRE 137 Performance Polymer:
  • Film
  • Sheet and boards
  • Adhesive tape
  • Paper lamination
  • Extrusion profiles and pipes
  • Drainage and sewage pipes
  • Blow moulded containers:
    • detergents
    • toiletries
    • foodstuffs

Complies with:
  • US FDA FCN 843
  • European Commission Regulation (EU) No 10/2011
Consult the regulations for complete details.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Agency Ratings 
 
Forms 
  • Pellets
Processing Method 
  • Blown Film
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Stress (Yield, Injection Molded)
psi
 ISO 527-2
Tensile Strain (Yield, Injection Molded)
%
 ISO 527-2
Flexural Modulus (Injection Molded)
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
     ISO 179/1eA
-4°F, Injection Molded
ft·lb/in²
  
32°F, Injection Molded
ft·lb/in²
  
73°F, Injection Molded
ft·lb/in²
  
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (66 psi, Unannealed)
°F
 ISO 75-2/B
Vicat Softening Temperature
°F
 ISO 306/A
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: INSPIRE™ 137, INSPIRE 137, INSPIRE™ 137 (Blow Molding Extrusion), INSPIRE 137 Blow Molding Extrusion, INSPIRE™ , INSPIRE, INSPIRE137BlowMoldingExtrusion, 137, 137 (Blow Molding Extrusion), 137 Blow Molding Extrusion, 137Blow, BlowMolding, MoldingExtrusion, 137BlowMoldingExtrusion, Polypropylene, Unspecified, Polypropylene Unspecified, PP, Unspecified, PP Unspecified, Polypropylene, PP, Braskem EU, PolypropyleneUnspecified, PPUnspecified, Blow137
Generic Name
Generic Name may also be described by the following terms: Polypropilene, Polypropelene.
Agency Ratings
This plastic material has 2 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1), EU (1).
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.