IDES Prospector Already have an account? Login Here

IDES

Orevac® 18760

Polypropylene Copolymer

Supplied by Arkema

The technical datasheet with complete property values for Orevac® 18760 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
OREVAC 18760 is a maleic anhydride grafted polypropylene used in the manufacturing of three layer PP coating for steel pipeline.
OREVAC 18760 is also used in multilayer EVOH - PP structures.
OREVAC 18760 is mainly used in pipe coating to have good adhesion performances between an epoxy primer and a PP or between EVOH and PP for heating tube applications.
OREVAC 18760 combined with a proper PP and epoxy fulfil the requirement of different application standards when applied in the rules of art.
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • Latin America
  • North America
  • South America
Features 
  • Good Adhesion
Uses 
  • Pipe Coatings
Forms 
  • Pellets
Processing Method 
  • Coextrusion
  • Extrusion
  
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (210°C/2.16 kg)
g/10 min
 ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Stress
     ISO 527-2/10
Yield, Compression Molded
psi
  
Break, Compression Molded
psi
  
Tensile Strain (Break, Compression Molded)
%
 ISO 527-2/10
Hardness
Nominal Value
Unit
Test Method
Shore Hardness (Shore D)
 
 ISO 868
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature
°F
 ISO 306
Melting Temperature
°F
 DSC
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Orevac® 18760, Orevac 18760, Orevac® , Orevac, Orevac18760, 18760, Polypropylene Copolymer, PP Copolymer, Polypropylene, PP, Arkema, PolypropyleneCopolymer, PPCopolymer
Features
Features may also be described by the following terms: Good Adhesion.
Uses
Uses may also be described by the following terms: Pipe Coatings, Pipe Coating.
Extrusion
Nominal Value
Unit
 
Cylinder Zone 1 Temp.
°F
  
Cylinder Zone 2 Temp.
°F
  
Cylinder Zone 3 Temp.
°F
  
Cylinder Zone 4 Temp.
°F
  
Cylinder Zone 5 Temp.
°F
  
Die Temperature
°F
  
Extrusion Notes
Fittings - Channels: 220-240°C
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.