IDES Prospector Already have an account? Login Here

IDES

Orevac® PPC

Polypropylene Copolymer

Supplied by Arkema

The technical datasheet with complete property values for Orevac® PPC is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
OREVAC PPC is a grafted maleic anhydride polypropylene used in the manufacturing of multilayer oxygen barrier tube.
OREVAC PPC is mainly used in multi-layer tube to have good adhesion between PP, PA and EVOH. OREVAC PPC combined with SOARNOL®from NIPPON GOSHEI provides very good oxygen barrier. These tubes are used in plumbing, sanitary, heating floor and also industrial applications.
General  
Material Status 
  • Commercial: Discontinued
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • Latin America
  • North America
  • South America
Features 
  • Good Adhesion
Uses 
  • Hose
  • Industrial Applications
  • Plumbing Parts
  • Tubing
  
Forms 
  • Pellets
Processing Method 
  • Coextrusion
  • Extrusion
  
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183, ASTM D1505
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ASTM D1238, ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength
     ASTM D638, ISO 527-2
Yield
psi
  
Break
psi
  
Tensile Elongation (Break)
%
 ASTM D638, ISO 527-2
Flexural Modulus
psi
 ISO 178
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature
°F
 ASTM D1525, ISO 306
Melting Temperature
°F
 DSC
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Orevac® PPC, Orevac PPC, Orevac® , Orevac, OrevacPPC, PPC, Polypropylene Copolymer, PP Copolymer, Polypropylene, PP, Arkema, PolypropyleneCopolymer, PPCopolymer
Features
Features may also be described by the following terms: Good Adhesion.
Uses
Uses may also be described by the following terms: Tubing, Tube.
Extrusion
Nominal Value
Unit
 
Cylinder Zone 1 Temp.
°F
  
Cylinder Zone 2 Temp.
°F
  
Cylinder Zone 3 Temp.
°F
  
Cylinder Zone 4 Temp.
°F
  
Cylinder Zone 5 Temp.
°F
  
Die Temperature
°F
  
Extrusion Notes
Fittings - Channels: 220-230°C
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.