IDES Prospector Already have an account? Login Here

IDES

Ecomass® 3608TU96

High Density Polyethylene

Tungsten Filler

Supplied by Ecomass Technologies

The technical datasheet with complete property values for Ecomass® 3608TU96 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Filler / Reinforcement 
  • Tungsten Filler
Features 
  • Good Toughness
  • High Density
  • High Specific Gravity
  • Medium Rigidity
  • Non-Toxic
Uses 
  • Radiation Shielding
Forms 
  • Pellets
Processing Method 
  • Compression Molding
  • Injection Molding
  
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Molding Shrinkage - Flow
in/in
 ASTM D955
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ASTM D638
Tensile Strength
psi
 ASTM D638
Tensile Elongation (Break)
%
 ASTM D638
Flexural Modulus
psi
 ASTM D790
Flexural Strength
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact
ft·lb/in
 ASTM D256
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness
 
 ASTM D2240
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
     ASTM D648
66 psi, Unannealed
°F
  
264 psi, Unannealed
°F
  
Additional Information
Surface Resistivity, ASTM D257: 0.2 ohms/sq
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Ecomass® 3608TU96, Ecomass 3608TU96, Ecomass® , Ecomass, Ecomass3608TU96, 3608 TU 96, 3608TU96, 3608TU, TU96, Polyethylene, High Density, Polyethylene High Density, HDPE, Polyethylene, PE, PolyethyleneHighDensity, TU3608
Features
Features may also be described by the following terms: High Density, High Specific Gravity, Good Toughness, Tough, Non-Toxic, Non Toxic, Toxicity None, High Specific Gravity, High Density, Medium Rigidity, Good Rigidity.
Injection
Nominal Value
Unit
 
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.