IDES Prospector Already have an account? Login Here

IDES

Ipiranga GF 5250

High Density Polyethylene

Supplied by Braskem

The technical datasheet with complete property values for Ipiranga GF 5250 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
GF 5250 is a High Density Polyethylene, copolymer, developed for the blow molding bottles of small sizes and offers an excellent resistance to impact and good stiffness.
This resin has excellent resistance to stress cracking, adequate for contact with surfactants and chemical products.
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • Latin America
  • North America
  • South America
Features 
  • Food Contact Acceptable
  • Good Chemical Resistance
  • Good Crack Resistance
  • Good Stiffness
  • High Density
  • High Impact Resistance
Uses 
  • Bottles
  • Drums
  
Agency Ratings 
Forms 
  • Pellets
Processing Method 
  • Blow Molding
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Melt Mass-Flow Rate (MFR)
     ASTM D1238
190°C/2.16 kg
g/10 min
  
190°C/21.6 kg
g/10 min
  
Environmental Stress-Cracking Resistance (100% Igepal, F50)
hr
 ASTM D1693B
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength
     ASTM D638
Yield
psi
  
Break
psi
  
Tensile Elongation
     ASTM D638
Yield
%
  
Break
%
  
Flexural Modulus - 2% Secant
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (73°F)
ft·lb/in
 ASTM D256
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore D, 15 sec)
 
 ASTM D2240
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (66 psi, Unannealed)
°F
 ASTM D648
Vicat Softening Temperature
°F
 ASTM D1525 2
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Ipiranga GF 5250, Ipiranga , IpirangaGF5250, GF 5250, GF5250, Polyethylene, High Density, Polyethylene High Density, HDPE, Polyethylene, PE, Braskem, PolyethyleneHighDensity, 5250GF
Features
Features may also be described by the following terms: High Density, High Specific Gravity, High Impact Resistance, Good Stiffness, Good Crack Resistance, Crack Resistant, Good Chemical Resistance, Chemical Resistant.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1).
Injection
Nominal Value
Unit
 
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Nozzle Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
2Loading 1 (10 N)
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.