IDES Prospector Already have an account? Login Here

IDES

Kingfa ABP-0520

Polypropylene

Unspecified Filler\Reinfor., 5.0%

Supplied by Kingfa

The technical datasheet with complete property values for Kingfa ABP-0520 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • North America
  
Filler / Reinforcement 
  • Unspecified Filler\Reinfor., 5.0% Filler by Weight
Features 
  • Good Adhesion
  • Paintable
  
Uses 
  • Automotive Bumper
  • Automotive Exterior Trim
  
Forms 
  • Pellets
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ASTM D1238
Molding Shrinkage - Flow (73°F)
in/in
 ASTM D955
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength 2 (73°F, Injection Molded)
psi
 ASTM D638
Tensile Elongation 2 (Break, 73°F, Injection Molded)
%
 ASTM D638
Flexural Modulus 3 (73°F, Injection Molded)
psi
 ASTM D790
Flexural Strength 3 (73°F, Injection Molded)
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact
     ASTM D256
-22°F, 0.126 in, Injection Molded
ft·lb/in
  
73°F, 0.126 in, Injection Molded
 
  
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (R-Scale)
 
 ASTM D785
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
     ASTM D648
66 psi, Unannealed, 0.252 in, Injection Molded
°F
  
264 psi, Unannealed, 0.252 in, Injection Molded
°F
  
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL (0.126 in)
 
 UL 94
Additional Information
Filler Content, ISO3451/1, Method A: 5%
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Kingfa ABP-0520, Kingfa ABP0520, Kingfa , KingfaABP0520, ABP, ABP-0520, ABP0520, ABP:0520, ABP/0520, ABP+0520, ABP_0520, ABP 0520, Polypropylene, Unspecified, Polypropylene Unspecified, PP, Unspecified, PP Unspecified, Polypropylene, PP, PolypropyleneUnspecified, PPUnspecified, 0520ABP
Generic Name
Generic Name may also be described by the following terms: Polypropilene, Polypropelene.
Features
Features may also be described by the following terms: Good Adhesion.
Uses
Uses may also be described by the following terms: Automotive Bumper, Automotive Bumpers.
Notes
1Typical properties: these are not to be construed as specifications.
22.0 in/min
30.079 in/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.