IDES Prospector Already have an account? Login Here

IDES

Kingfa AP-201

Polypropylene

Unspecified Filler\Reinfor., 20%

Supplied by Kingfa

The technical datasheet with complete property values for Kingfa AP-201 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • North America
 
Filler / Reinforcement 
  • Unspecified Filler\Reinfor., 20% Filler by Weight
Features 
  • Good Weather Resistance
Uses 
  • Outdoor Applications
Forms 
  • Pellets
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
ASTM D792
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
ASTM D1238
Molding Shrinkage - Flow (73°F)
in/in
ASTM D955
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength 2 (73°F, Injection Molded)
psi
ASTM D638
Tensile Elongation 2 (Break, 73°F, Injection Molded)
%
ASTM D638
Flexural Modulus 3 (73°F, Injection Molded)
psi
ASTM D790
Flexural Strength 3 (73°F, Injection Molded)
psi
ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (73°F, 0.126 in, Injection Molded)
ft·lb/in
ASTM D256
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (R-Scale)
 
ASTM D785
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (66 psi, Unannealed, 0.252 in, Injection Molded)
°F
ASTM D648
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL (0.126 in)
 
UL 94
Additional Information
Filler Content, ISO3451/1, Method A: 20%
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Kingfa AP-201, Kingfa AP201, Kingfa , KingfaAP201, AP, AP-201, AP201, AP:201, AP/201, AP+201, AP_201, AP 201, Polypropylene, Unspecified, Polypropylene Unspecified, PP, Unspecified, PP Unspecified, Polypropylene, PP, PolypropyleneUnspecified, PPUnspecified, 201AP
Generic Name
Generic Name may also be described by the following terms: Polypropilene, Polypropelene.
Features
Features may also be described by the following terms: Good Weather Resistance, Weather Resistant.
Notes
1Typical properties: these are not to be construed as specifications.
22.0 in/min
30.079 in/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.