IDES Prospector Already have an account? Login Here

IDES

Kingfa FRHIPS-8002U

High Impact Polystyrene

Supplied by Kingfa

The technical datasheet with complete property values for Kingfa FRHIPS-8002U is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • North America
  
Features 
  • Flame Retardant
  • High Impact Resistance
  • Low Density
Uses 
  • Automotive Applications
  • Housings
  
Forms 
  • Pellets
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Melt Mass-Flow Rate (MFR) (200°C/5.0 kg)
g/10 min
 ASTM D1238
Molding Shrinkage - Flow (73°F)
in/in
 ASTM D955
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength 2 (73°F, Injection Molded)
psi
 ASTM D638
Tensile Elongation 2 (Break, 73°F, Injection Molded)
%
 ASTM D638
Flexural Modulus 3 (73°F, Injection Molded)
psi
 ASTM D790
Flexural Strength 3 (73°F, Injection Molded)
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (73°F, 0.126 in, Injection Molded)
ft·lb/in
 ASTM D256
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (R-Scale)
 
 ASTM D785
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (264 psi, Unannealed, 0.252 in)
°F
 ASTM D648
Vicat Softening Temperature
°F
 ASTM D1525 4
Electrical
Nominal Value
Unit
Test Method
Surface Resistivity
ohms
 ASTM D257
Volume Resistivity
ohm·cm
 ASTM D257
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL (0.0630 in)
 
 UL 94
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Kingfa FRHIPS-8002U, Kingfa FRHIPS8002U, Kingfa , KingfaFRHIPS8002U, FRHIPS, FRHIPS 8002 U, FRHIPS-8002U, FRHIPS8002U, FRHIPS:8002U, FRHIPS/8002U, FRHIPS+8002U, FRHIPS_8002U, FRHIPS 8002U, FRHIPS8002, 8002U, PS, Polystyrene, High Impact, Polystyrene High Impact, PS (HIPS), PS HIPS, Polystyrene, PolystyreneHighImpact, PSHIPS, 8002FRHIPS
Features
Features may also be described by the following terms: High Impact Resistance, Low Density, Low Specific Gravity.
Uses
Uses may also be described by the following terms: Automotive Applications, Automotive Sector, Housings, Housing.
Notes
1Typical properties: these are not to be construed as specifications.
22.0 in/min
30.079 in/min
4Rate B (120°C/h), Loading 1 (10 N)
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.