Kingfa HF-606 Kingfa Acrylonitrile Butadiene Styrene

General

Material Status

Availability

Additive

Features

Forms

Processing Method

Physical	Nominal Value	Unit	Test Method
Specific Gravity			ASTM D792
Melt Mass-Flow Rate (MFR)			ASTM D1238
200°C/5.0 kg		g/10 min
220°C/10.0 kg		g/10 min
Molding Shrinkage - Flow (73°F)		in/in	ASTM D955
Mechanical	Nominal Value	Unit	Test Method
Tensile Strength²		psi	ASTM D638
Tensile Elongation² (Break)		%	ASTM D638
Flexural Modulus³		psi	ASTM D790
Flexural Strength³		psi	ASTM D790
Impact	Nominal Value	Unit	Test Method
Notched Izod Impact			ASTM D256
73°F, 0.126 in		ft·lb/in
73°F, 0.252 in		ft·lb/in
Hardness	Nominal Value	Unit	Test Method
Rockwell Hardness (R-Scale)			ASTM D785
Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load			ASTM D648
66 psi, Unannealed, 0.252 in		°F
264 psi, Unannealed, 0.252 in		°F
Vicat Softening Temperature
--		°F	ASTM D1525⁴
--		°F	ASTM D1525⁵
Electrical	Nominal Value	Unit	Test Method
Volume Resistivity		ohm·cm	ASTM D257
Dielectric Strength		V/mil	ASTM D149
Flammability	Nominal Value	Unit	Test Method
Flame Rating - UL			UL 94
0.0630 in
0.118 in
0.0787 in
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Kingfa HF-606, Kingfa HF606, Kingfa , KingfaHF606, HF, HF-606, HF606, HF:606, HF/606, HF+606, HF_606, HF 606, Acrylonitrile Butadiene Styrene, ABS, AcrylonitrileButadieneStyrene, 606HF
Features
Features may also be described by the following terms: High Flow, High Melt, High MFI, High Stiffness.

Injection	Nominal Value	Unit
Drying Temperature		°F
Drying Time		hr
Rear Temperature		°F
Middle Temperature		°F
Front Temperature		°F
Processing (Melt) Temp		°F
Mold Temperature		°F
Injection Rate
Back Pressure		psi
Injection Notes
Processing Temperature Limit: 230°C

Notes

¹Typical properties: these are not to be construed as specifications.

²2.0 in/min

³0.079 in/min

⁴Rate A (50°C/h), Loading 2 (50 N)

⁵Rate B (120°C/h), Loading 1 (10 N)

Kingfa HF-606