INEOS LLDPE LL2640AC Ineos Polyolefins Polyethylene, Linear Low Density

Product Description

Applications
LL2640AC has been specially designed for the production of high quality cast films, such as display packaging, bubble film and non-cling layers for stretch film.

Benefits and Features
LL2640AC is a linear low density polyethylene copolymer containing butene-1 (C4) as the comonomer.
LL2640AC has the following advantageous properties:

Melt flow rate tailored for high output cast extrusion

Excellent combination of strength and stiffness

High gloss and clarity.

If corona treatment is necessary, the level should normally be in the range 38-48 mN/m

We recommend that you consult your INEOS technical representative for further advice on the use of LL2640AC,

General

Material Status

Commercial: Active

Availability

Europe

Additive

Antioxidant

Features

Butene Comonomer

Good Flow

Good Stiffness

Good Strength

High Clarity

High Gloss

Uses

Cast Film

Film

Packaging

Stretch Wrap

RoHS Compliance

Forms

Pellets

Processing Method

Blown Film

Cast Film

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183/D
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)		g/10 min	ISO 1133
Films	Nominal Value	Unit	Test Method
Film Thickness - Tested		mil
Tensile Stress			ISO 1184
MD: Yield, 1.5 mil		psi
TD: Yield, 1.5 mil		psi
MD: 1.5 mil		psi
TD: 1.5 mil		psi
Tensile Elongation			ISO 1184
MD: Break, 1.5 mil		%
TD: Break, 1.5 mil		%
Dart Drop Impact (1.5 mil)		g	ASTM D1709A
Elmendorf Tear Strength			ASTM D1922
MD: 1.5 mil		lbf/in
TD: 1.5 mil		lbf/in
Thermal	Nominal Value	Unit	Test Method
Vicat Softening Temperature		°F	ISO 306/A
Optical	Nominal Value	Unit	Test Method
Gloss (45°, 1.50 mil)			ASTM D2457
Haze (1.50 mil)		%	ASTM D1003
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: INEOS LLDPE LL2640AC, INEOS LLDPE , INEOSLLDPELL2640AC, INEOSLLDPE, LLDPELL 2640 AC, LLDPELL2640AC, LLDPELL2640, LLDPE, LL 2640 AC, LL2640AC, LL2640, 2640AC, Polyethylene, Linear Low Density, Polyethylene Linear Low Density, Polyethylene, PE, Ineos Polyolefins, PolyethyleneLinearLowDensity, 2640LL, 2640LLDPELL
Features
Features may also be described by the following terms: High Gloss, Good Flow, Butene Comonomer, Good Strength, High Clarity, Good Stiffness.
Uses
Uses may also be described by the following terms: Cast Film, Stretch Wrap.

Extrusion	Nominal Value	Unit
Melt Temperature		°F
Extrusion Notes
Blown Film Melt Temperature: 160 to 215°C

Notes

¹Typical properties: these are not to be construed as specifications.

INEOS LLDPE LL2640AC

Linear Low Density Polyethylene

Supplied by INEOS Olefins & Polymers Europe