IDES Prospector Already have an account? Login Here

IDES

INEOS PP H03W-01

Polypropylene Homopolymer

Supplied by INEOS Olefins & Polymers USA

The technical datasheet with complete property values for INEOS PP H03W-01 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Homopolymer H03W-01 belongs to the new generation of polypropylenes produced by gas-phase polymerization. This nominal 4 melt-flow-index product is specifically designed for fiber applications, which require low-water-carryover characteristics coupled with good melt and thermal stability in the finished product.

Specific applications for H03W-01 include cordage, carpet backing, industrial fabrics and geotextiles. Product grade H03W-01 meets FDA requirements of 21CFR 177.1520.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Features 
  • Food Contact Acceptable
  • Good Thermal Stability
  • High Melt Stability
  • Homopolymer
  • Low Water Carryover
Uses 
  • Carpet Backing
  • Fabrics
  • Fibers
  • Textile Applications
  
Agency Ratings 
RoHS Compliance 
Forms 
  • Pellets
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ASTM D1238
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength 2 (Yield)
psi
 ASTM D638
Tensile Elongation 2 (Yield)
%
 ASTM D638
Flexural Modulus - 1% Secant 3
psi
 ASTM D790A
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (73°F)
ft·lb/in
 ASTM D256
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore D)
 
 ASTM D2240
Thermal
Nominal Value
Unit
Test Method
Melting Temperature
°F
  
Peak Crystallization Temperature (DSC)
°F
 ASTM D3418
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: INEOS PP H03W-01, INEOS PP H03W01, INEOS PP , INEOSPPH03W01, INEOSPP, H 03 W, PPH 03 W 01, PPH 03 W, H03W, PPH03W-01, PPH03W01, PPH03W:01, PPH03W/01, PPH03W+01, PPH03W_01, PPH03W 01, PPH03, PPH03W, H 03 W 01, H03W-01, H03W01, H03W:01, H03W/01, H03W+01, H03W_01, H03W 01, H03, 03W, W01, Polypropylene Homopolymer, PP Homopolymer, Polypropylene, PP, Ineos USA, PolypropyleneHomopolymer, PPHomopolymer, 03H, 03PPH
Features
Features may also be described by the following terms: Good Thermal Stability, High Melt Stability, Low Water Carryover.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1).
Notes
1Typical properties: these are not to be construed as specifications.
22.0 in/min
30.050 in/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.