IDES Prospector Already have an account? Login Here

IDES

INEOS PP H03W-00

Polypropylene Homopolymer

Supplied by INEOS Olefins & Polymers USA

The technical datasheet with complete property values for INEOS PP H03W-00 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Grade H03W-00 is a homopolymer designed for extrusion processing. It exhibits low water carry over. This material meets the requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Features 
  • Food Contact Acceptable
  • Homopolymer
  • Low Water Carryover
Uses 
  • Bags
  • Carpet Backing
  • Twine
Agency Ratings 
RoHS Compliance 
Forms 
  • Pellets
Processing Method 
  • Extrusion
Physical
Nominal Value
Unit
Test Method
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ASTM D1238
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength (Yield, Injection Molded)
psi
 ASTM D638
Tensile Elongation (Yield, Injection Molded)
%
 ASTM D638
Flexural Modulus (Injection Molded)
psi
 ASTM D790A
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (66 psi, Unannealed, Injection Molded)
°F
 ASTM D648
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: INEOS PP H03W-00, INEOS PP H03W00, INEOS PP , INEOSPPH03W00, INEOSPP, H 03 W, PPH 03 W 00, PPH 03 W, H03W, PPH03W-00, PPH03W00, PPH03W:00, PPH03W/00, PPH03W+00, PPH03W_00, PPH03W 00, PPH03, PPH03W, H 03 W 00, H03W-00, H03W00, H03W:00, H03W/00, H03W+00, H03W_00, H03W 00, H03, 03W, W00, Polypropylene Homopolymer, PP Homopolymer, Polypropylene, PP, Ineos USA, PolypropyleneHomopolymer, PPHomopolymer, 03H, 03PPH
Features
Features may also be described by the following terms: Low Water Carryover.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1).
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.