IDES Prospector Already have an account? Login Here

IDES

INEOS PP H02C-01

Polypropylene Homopolymer

Supplied by INEOS Olefins & Polymers USA

The technical datasheet with complete property values for INEOS PP H02C-01 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Grade H02C-01 is a low flow rate, high clarity homopolymer designed for extrusion, thermoforming, blow molding, and rigid packaging. Applications that require good see-through clarity combined with good heat resistance can benefit from the use of grade H02C-01. This material meets the requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520.

Applications
  • Thermoformed packaging (cups, containers, lidding)
  • Extrusion blow molded containers and bottles
  • Injection blow molded containers and bottles
  • Extruded sheet and profiles
Benefits
  • Excellent clarity
  • Excellent processability
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Features 
  • Food Contact Acceptable
  • Good Processability
  • High Clarity
  • High Heat Resistance
  • Homopolymer
  • Low Flow
Uses 
  • Blown Containers
  • Bottles
  • Containers
  • Cups
  • Lids
  • Profiles
  • Rigid Packaging
  • Sheet
  • Thermoformed Containers
Agency Ratings 
RoHS Compliance 
Forms 
  • Pellets
Processing Method 
  • Blow Molding
  • Extrusion
  • Extrusion Blow Molding
  • Injection Blow Molding
  • Profile Extrusion
  • Sheet Extrusion
  • Thermoforming
Physical
Nominal Value
Unit
Test Method
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ASTM D1238
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength (Yield, 73°F, Injection Molded)
psi
 ASTM D638
Flexural Modulus (73°F, Injection Molded)
psi
 ASTM D790A
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (66 psi, Unannealed, Injection Molded)
°F
 ASTM D648
Optical
Nominal Value
Unit
Test Method
Haze (50.0 mil, Injection Molded)
%
 ASTM D1003
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: INEOS PP H02C-01, INEOS PP H02C01, INEOS PP , INEOSPPH02C01, INEOSPP, H 02 C, PPH 02 C 01, PPH 02 C, H02C, PPH02C-01, PPH02C01, PPH02C:01, PPH02C/01, PPH02C+01, PPH02C_01, PPH02C 01, PPH02, PPH02C, H 02 C 01, H02C-01, H02C01, H02C:01, H02C/01, H02C+01, H02C_01, H02C 01, H02, 02C, C01, Polypropylene Homopolymer, PP Homopolymer, Polypropylene, PP, Ineos USA, PolypropyleneHomopolymer, PPHomopolymer, 02H, 02PPH
Features
Features may also be described by the following terms: Low Flow, Low Melt, Low MFI, High Heat Resistance, High Clarity, Good Processability, Easy Processing.
Uses
Uses may also be described by the following terms: Thermoformed Containers, Thermoformed Container, Blow Containers, Blown Container, Rigid Packaging.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1).
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.