IDES Prospector Already have an account? Login Here

IDES

Eltex® P KS607

Polypropylene Copolymer

Supplied by INEOS Olefins & Polymers Europe

The technical datasheet with complete property values for Eltex® P KS607 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Eltex® P KS607 is a resin with enhanced surface properties, specifically developed for the metal receptive skin layer in metallised film applications. This resin is also specifically designed to achieve good treatment retention over time before and after metallisation as well as good barrier properties on metallised film. Its well adapted composition allows film with improved haze and gloss properties to be produced.

Applications
  • Butene copolymer for metallisable skin layer in coextruded film
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Features 
  • Barrier Resin
  • Butene Comonomer
  • Copolymer
  • Good Surface Finish
  
Uses 
  • Coating Applications
  • Film
  
RoHS Compliance 
Forms 
  • Pellets
Processing Method 
  • Coextrusion
  • Film Extrusion
  
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Stress (Yield)
psi
 ISO 527-2
Flexural Modulus (73°F)
psi
 ISO 178
Films
Nominal Value
Unit
Test Method
Seal Initiation Temperature 2
°F
  
Hardness
Nominal Value
Unit
Test Method
Shore Hardness (Shore D, 73°F)
 
 ISO 868
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (66 psi, Unannealed)
°F
 ISO 75-2/B
Vicat Softening Temperature
°F
 ISO 306/A
Melting Temperature
°F
 ASTM D3417
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Eltex® P KS607, Eltex P KS607, Eltex® P , Eltex P, EltexPKS607, EltexP, PKS 607, PKS607, KS 607, KS607, Polypropylene Copolymer, PP Copolymer, Polypropylene, PP, Ineos Polyolefins, PolypropyleneCopolymer, PPCopolymer, 607KS, 607PKS
Features
Features may also be described by the following terms: Butene Comonomer, Good Surface Finish.
Notes
1Typical properties: these are not to be construed as specifications.
21s, 3 bars, 100 mm/min, 100 g/cm
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.