IDES Prospector Already have an account? Login Here

IDES

FERROFLO® SPS05PK03NA

Medium Impact Polystyrene

Supplied by Ferro Corporation

The technical datasheet with complete property values for FERROFLO® SPS05PK03NA is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Additive 
  • Silicone Lubricant (55000 ppm)
Features 
  • Lubricated
  • Self Lubricating
  
Forms 
  • Pellets
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Melt Mass-Flow Rate (MFR) (230°C/3.8 kg)
g/10 min
 ASTM D1238
Molding Shrinkage - Flow
in/in
 ASTM D955
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength (73°F)
psi
 ASTM D638
Tensile Elongation (Break, 73°F)
%
 ASTM D638
Flexural Modulus
     ASTM D790
1% Secant: 73°F
psi
  
Tangent: 73°F
psi
  
Flexural Strength (73°F)
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (73°F, 0.125 in)
ft·lb/in
 ASTM D256
Unnotched Izod Impact (73°F, 0.125 in)
ft·lb/in
 ASTM D4812
Gardner Impact (73°F)
in·lb
 ASTM D5420
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore D)
 
 ASTM D2240
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
     ASTM D648
66 psi, Unannealed
°F
  
264 psi, Unannealed
°F
  
Additional Information
Silicone Content, Compuglass: 5.5%
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: FERROFLO® SPS05PK03NA, FERROFLO SPS05PK03NA, FERROFLO® , FERROFLO, FERROFLOSPS05PK03NA, SPS 05 PK 03 NA, SPS05PK03NA, SPS05, 05PK, PK03, 03NA, PS, Polystyrene, Medium Impact, Polystyrene Medium Impact, PS (MIPS), PS MIPS, Polystyrene, Ferro, PolystyreneMediumImpact, PSMIPS, 05SPS
Features
Features may also be described by the following terms: Self-Lubricating, Self Lubricating.
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.