Zytel® HTN 54G50HSLR BK031 DuPont Polyphthalamide (Glass Fiber Reinforcement, 50%)

Product Description

Zytel® HTN54G50HSLR BK031 is a 50% glass reinforced, toughened, heat stabilized, hydrolysis resistant high performance polyamide resin developed for retention of toughness and stiffness with moisture in structural applications. It is also a PPA resin.

General

Material Status

Commercial: Active

Availability

Asia Pacific

Europe

North America

Filler / Reinforcement

Glass Fiber Reinforcement, 50% Filler by Weight

Additive

Heat Stabilizer

Lubricant

Features

Hydrolysis Resistant

Low Warpage

RoHS Compliance

Appearance

Black

Processing Method

Injection Molding

Multi-Point Data

Isothermal Stress vs. Strain (ISO 11403-1)

Tensile Fatigue (ISO 13003)

Part Marking Code (ISO 11469)

>PA-IGF50<

Part Marking Code (SAE J1344)

Physical	Dry	Conditioned	Unit	Test Method
Density		--	g/cm³	ISO 1183
Molding Shrinkage				ISO 294-4
Across Flow: 0.0787 in		--	%
Flow: 0.0787 in		--	%
Water Absorption (73°F, 24 hr)		--	%	ISO 62
Mechanical	Dry	Conditioned	Unit	Test Method
Tensile Modulus (73°F)			psi	ISO 527-2
Tensile Stress (Break, 73°F)			psi	ISO 527-2
Tensile Strain (Break, 73°F)			%	ISO 527-2
Flexural Modulus (73°F)		--	psi	ISO 178
Flexural Strength (73°F)		--	psi	ISO 178
Impact	Dry	Conditioned	Unit	Test Method
Charpy Notched Impact Strength				ISO 179/1eA
-22°F			ft·lb/in²
73°F			ft·lb/in²
Charpy Unnotched Impact Strength				ISO 179/1eU
-22°F			ft·lb/in²
73°F			ft·lb/in²
Thermal	Dry	Conditioned	Unit	Test Method
Heat Deflection Temperature
66 psi, Unannealed		--	°F	ISO 75-2/B
264 psi, Unannealed		--	°F	ISO 75-2/A
Melting Temperature²		--	°F	ISO 11357-3
CLTE				ISO 11359-2
Flow: -40 to 73°F		--	in/in/°F
Flow: 73 to 131°F		--	in/in/°F
Transverse: -40 to 73°F		--	in/in/°F
Transverse: 73 to 131°F		--	in/in/°F
Transverse: 257 to 320°F		--	in/in/°F
Electrical	Dry	Conditioned	Unit	Test Method
Surface Resistivity		--	ohm	IEC 60093
Volume Resistivity		--	ohm·cm	IEC 60093
Flammability	Dry	Conditioned	Unit	Test Method
Flame Rating - UL (0.0295 in)		--		UL 94
UL	Dry	Conditioned	Unit	Test Method
RTI Str				UL 746
0.0295 in		--	°F
0.0591 in		--	°F
0.118 in		--	°F
RTI Imp				UL 746
0.0295 in		--	°F
0.0591 in		--	°F
0.118 in		--	°F
RTI Elec				UL 746
0.0295 in		--	°F
0.0591 in		--	°F
0.118 in		--	°F
Comparative Tracking Index (CTI)		--	V	UL 746
Related Terminology
Dry	Product names can be difficult to match. You may have searched any one of these terms to find this product: Zytel® HTN 54G50HSLR BK031, Zytel HTN 54G50HSLR BK031, Zytel® HTN , Zytel HTN, ZytelHTN54G50HSLRBK031, ZytelHTN, HTN 54 G 50 HSLR BK 031, HTN54G50HSLR BK031, HTN54, HTN, 54 G 50 HSLR BK 031, HTN54G50HSLRBK031, 54G50HSLR BK031, 54G, G50, 50HSLR, HSLRBK, BK031, 54G50HSLRBK031, Polyphthalamide, PPA, Polyamide, Nylon, DuPont, G54, 54HTN
Features
Dry	Features may also be described by the following terms: Low Warpage, Low Warp.
Conditioned	Product names can be difficult to match. You may have searched any one of these terms to find this product: Zytel® HTN 54G50HSLR BK031, Zytel HTN 54G50HSLR BK031, Zytel® HTN , Zytel HTN, ZytelHTN54G50HSLRBK031, ZytelHTN, HTN 54 G 50 HSLR BK 031, HTN54G50HSLR BK031, HTN54, HTN, 54 G 50 HSLR BK 031, HTN54G50HSLRBK031, 54G50HSLR BK031, 54G, G50, 50HSLR, HSLRBK, BK031, 54G50HSLRBK031, Polyphthalamide, PPA, Polyamide, Nylon, DuPont, G54, 54HTN

Injection	Dry	Unit
Drying Temperature		°F
Drying Time		hr
Suggested Max Moisture		%
Processing (Melt) Temp		°F
Melt Temperature, Optimum		°F
Mold Temperature		°F

Notes

¹Typical properties: these are not to be construed as specifications.

²10°C/min, First Heat

Zytel® HTN 54G50HSLR BK031

HIGH PERFORMANCE POLYAMIDE RESIN

Glass Fiber Reinforcement, 50%

Supplied by DuPont Performance Polymers