|
Density
|
|
g/cm³
|
ASTM D1505 |
|
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
|
|
g/10 min
|
ASTM D1238 |
|
Secant Modulus
|
|
|
ASTM D882 |
|
1% Secant, MD: 1.3 mil, Cast Film
|
|
psi
|
|
|
1% Secant, TD: 1.3 mil, Cast Film
|
|
psi
|
|
|
Tensile Strength
|
|
|
ASTM D882 |
|
MD: Break, 1.3 mil, Cast Film
|
|
psi
|
|
|
TD: Break, 1.3 mil, Cast Film
|
|
psi
|
|
|
Tensile Elongation
|
|
|
ASTM D882 |
|
MD: Break, 1.3 mil, Cast Film
|
|
%
|
|
|
TD: Break, 1.3 mil, Cast Film
|
|
%
|
|
|
Water Vapor Transmission Rate (1.3 mil, Cast Film)
|
|
g/100 in²/24 hr
|
ASTM F1249 |
|
Dart Drop Test - Cast Film (1.3 mil)
|
|
lbf/in
|
ASTM D1709 |
|
Elmendorf Tear Strength 2
|
|
|
ASTM D1922 |
|
MD: 1.3 mil
|
|
lbf/in
|
|
|
TD: 1.3 mil
|
|
lbf/in
|
|
|
Gloss (60°, 1.25 mil, Cast Film)
|
|
|
ASTM D2457 |
|
Haze (1.25 mil, Cast Film)
|
|
%
|
ASTM D1003 |
|
Product names can be difficult to match. You may have searched any one of these terms to find this product: MarFlex® 9608XD, MarFlex 9608XD, MarFlex® , MarFlex, MarFlex9608XD, 9608 XD, 9608XD, Polyethylene, High Density, Polyethylene High Density, HDPE, Polyethylene, PE, CP Chem, PolyethyleneHighDensity, XD9608
|
|
Features may also be described by the following terms: Low Gel, Good Drawdown, Good draw down, Good Stiffness, Good Processability, Easy Processing, High Clarity.
|
|
Uses may also be described by the following terms: Cast Film, Stretch Wrap, Food Packaging.
|