|
Specific Gravity
|
|
|
ASTM D792 |
|
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
|
|
g/10 min
|
ASTM D1238 |
|
Tensile Strength (Break)
|
|
psi
|
ASTM D638 |
|
Tensile Elongation (Break)
|
|
%
|
ASTM D638 |
|
Coefficient of Friction (Blown Film)
|
|
|
ASTM D1894 |
|
Film Thickness - Tested
|
|
mil
|
|
|
Tensile Strength
|
|
|
ASTM D882 |
|
MD: Yield, 0.98 mil, Blown Film
|
|
psi
|
|
|
TD: Yield, 0.98 mil, Blown Film
|
|
psi
|
|
|
MD: Break, 0.98 mil, Blown Film
|
|
psi
|
|
|
TD: Break, 0.98 mil, Blown Film
|
|
psi
|
|
|
Tensile Elongation
|
|
|
ASTM D882 |
|
MD: Break, 0.98 mil, Blown Film
|
|
%
|
|
|
TD: Break, 0.98 mil, Blown Film
|
|
%
|
|
|
Dart Drop Impact (0.98 mil, Blown Film)
|
|
g
|
ASTM D1709A |
|
Elmendorf Tear Strength
|
|
|
ASTM D1922 |
|
MD: 0.98 mil, Blown Film
|
|
g
|
|
|
TD: 0.98 mil, Blown Film
|
|
g
|
|
|
Brittleness Temperature
|
|
°F
|
ASTM D746 |
|
Vicat Softening Temperature
|
|
°F
|
ASTM D1525 |
|
Gloss (45°, 0.984 mil, Blown Film)
|
|
|
ASTM D2457 |
|
Haze (0.984 mil, Blown Film)
|
|
%
|
ASTM D1003 |
|
Film properties taken from 25µm film produced on a 63 mm extruder, L/D=24, die gap=1.5 mm, BUR=2:1
|
|
Product names can be difficult to match. You may have searched any one of these terms to find this product: LinTech® FS-41, LinTech FS41, LinTech® , LinTech, LinTechFS41, FS, FS-41, FS41, FS:41, FS/41, FS+41, FS_41, FS 41, Polyethylene, Linear Low Density, Polyethylene Linear Low Density, LLDPE, Polyethylene, PE, Braskem, PolyethyleneLinearLowDensity, 41FS
|
|
Features may also be described by the following terms: Narrow Molecular Weight Distribution, Narrow MW Distribution.
|
|
Uses may also be described by the following terms: Stretch Wrap.
|
|
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1).
|