IDES Prospector Already have an account? Login Here

IDES

GELOY* CR7500 Resin

Acrylonitrile Styrene Acrylate + AMSAN

Supplied by SABIC Innovative Plastics

The technical datasheet with complete property values for GELOY* CR7500 Resin is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
High heat ASA with optimum flow-impact balance. For Automotive applications and Automotive colors only.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Features 
  • Good Flow
  • Good Impact Resistance
  • High Heat Resistance
Uses 
  • Automotive Applications
Automotive Specifications 
 
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Specific Gravity
      
--
 
 ASTM D792
--
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR)
     ASTM D1238
220°C/10.0 kg
g/10 min
  
260°C/5.0 kg
g/10 min
  
Melt Volume-Flow Rate (MVR)
     ISO 1133
220°C/10.0 kg
in³/10min
  
260°C/5.0 kg
in³/10min
  
Molding Shrinkage - Flow (0.126 in)
in/in
 Internal Method
Water Absorption
     ISO 62
Saturation, 73°F
%
  
Equilibrium, 73°F, 50% RH
%
  
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
      
-- 2
psi
 ASTM D638
--
psi
 ISO 527-2/1
Tensile Strength
      
Yield 3
psi
 ASTM D638
Yield
psi
 ISO 527-2/5
Break 3
psi
 ASTM D638
Break
psi
 ISO 527-2/5
Tensile Elongation
      
Yield 3
%
 ASTM D638
Yield
%
 ISO 527-2/5
Break 3
%
 ASTM D638
Break
%
 ISO 527-2/5
Flexural Modulus
      
1.97 in Span 4
psi
 ASTM D790
-- 5
psi
 ISO 178
Flexural Strength
      
-- 5, 6
psi
 ISO 178
Yield, 1.97 in Span 4
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength 7 (73°F)
ft·lb/in²
 ISO 179/1eA
Notched Izod Impact
      
-22°F
ft·lb/in
 ASTM D256
73°F
ft·lb/in
 ASTM D256
-22°F 8
ft·lb/in²
 ISO 180/1A
73°F 8
ft·lb/in²
 ISO 180/1A
Instrumented Dart Impact (73°F, Total Energy)
in·lb
 ASTM D3763
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
      
264 psi, Unannealed, 0.126 in
°F
 ASTM D648
264 psi, Unannealed, 3.94 in Span 9
°F
 ISO 75-2/Ae
264 psi, Unannealed, 2.52 in Span 10
°F
 ISO 75-2/Af
Vicat Softening Temperature
      
--
°F
 ASTM D1525 11
--
°F
 ISO 306/B50
--
°F
 ISO 306/B120
Ball Pressure Test 12 (208°F)
 
 IEC 60695-10-2
CLTE
     ASTM E831, ISO 11359-2
Flow: -40 to 104°F
in/in/°F
  
Transverse: -40 to 104°F
in/in/°F
  
Related Terminology
This supplier and product may also be known by these terms: GE Plastics, LNP Engineering Plastics, GE Polymerland

Product names can be difficult to match. You may have searched any one of these terms to find this product: GELOY* CR7500 Resin, GELOY CR7500 Resin, GELOY* , GELOY, GELOYCR7500Resin, CR 7500 Resin, CR7500 Resin, CR7500, 7500Resin, CR7500Resin, Acrylonitrile Styrene Acrylate + AMSAN, Acrylonitrile Styrene Acrylate AMSAN, Acrylonitrile Styrene Acrylate : AMSAN, Acrylonitrile Styrene Acrylate / AMSAN, Acrylonitrile Styrene Acrylate - AMSAN, Acrylonitrile Styrene Acrylate _ AMSAN, Acrylonitrile Styrene Acrylate AMSAN, ASA+AMSAN, ASAAMSAN, ASA:AMSAN, ASA/AMSAN, ASA-AMSAN, ASA_AMSAN, ASA AMSAN, Acrylonitrile Styrene Acrylate, ASA, SABIC IP, AcrylonitrileStyreneAcrylateAMSAN, AcrylonitrileStyreneAcrylate, AcrylonitrileStyreneAcrylate_AMSAN, 7500CR
Features
Features may also be described by the following terms: Good Flow, Good Impact Resistance, High Heat Resistance.
Uses
Uses may also be described by the following terms: Automotive Applications, Automotive Sector.
Automotive Specifications
This plastic material has approval for 2 automotive specifications from the following agencies (the number in parentheses shows the number of specifications for that agency): CHRYSLER (1), GM (1).
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Drying Time, Maximum
hr
  
Suggested Max Moisture
%
  
Suggested Shot Size
%
  
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Nozzle Temperature
°F
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Back Pressure
psi
  
Screw Speed
rpm
  
Vent Depth
in
  
Notes
1Typical properties: these are not to be construed as specifications.
20.20 in/min
3Type I, 0.20 in/min
40.051 in/min
50.079 in/min
6Yield
780*10*4 sp=62mm
880*10*4
9120*10*4 mm
1080*10*4 mm
11Rate B (120°C/h), Loading 2 (50 N)
12Approximate maximum
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.