CYCOLOY C4210HF Resin SABIC IP Euro Acrylonitrile Butadiene Styrene + PC (Glass Fiber Reinforcement, 10%)

Product Description

CYCOLOY C4210HF is a 10% glass reinforced, non-FR PC+ABS grade with high heat resistance, excellent strength and rigidity with good cosmetic appearance. It combines a good processabity with a low shrinkage.

General

Material Status

Commercial: Active

Availability

Europe

Filler / Reinforcement

Glass Fiber Reinforcement, 10% Filler by Weight

Features

Good Processability

Good Strength

High Heat Resistance

Low Shrinkage

Medium Rigidity

Pleasing Surface Appearance

RoHS Compliance

Processing Method

Injection Molding

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183
Melt Volume-Flow Rate (MVR) (260°C/5.0 kg)		in³/10min	ISO 1133
Molding Shrinkage - Flow²		in/in	Internal Method
Water Absorption			ISO 62
Saturation, 73°F		%
Equilibrium, 73°F, 50% RH		%
Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus		psi	ISO 527-2/1
Tensile Stress			ISO 527-2/5
Yield		psi
Break		psi
Tensile Strain			ISO 527-2/5
Yield		%
Break		%
Flexural Modulus³		psi	ISO 178
Flexural Strength³			ISO 178
--⁴		psi
--⁵		psi
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength⁶ (73°F)		ft·lb/in²	ISO 179/1eA
Charpy Unnotched Impact Strength⁶ (73°F)		ft·lb/in²	ISO 179/1eU
Notched Izod Impact Strength⁷ (73°F)		ft·lb/in²	ISO 180/1A
Unnotched Izod Impact Strength⁷ (73°F)		ft·lb/in²	ISO 180/1U
Hardness	Nominal Value	Unit	Test Method
Rockwell Hardness (R-Scale)			ISO 2039-2
Ball Indentation Hardness (H 358/30)		psi	ISO 2039-1
Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature⁸
66 psi, Unannealed, 3.94 in Span		°F	ISO 75-2/Be
264 psi, Unannealed, 3.94 in Span		°F	ISO 75-2/Ae
Vicat Softening Temperature
--		°F	ISO 306/B50
--		°F	ISO 306/B120
Ball Pressure Test			IEC 60695-10-2
167°F
257°F
CLTE			ISO 11359-2
Flow: -40 to 104°F		in/in/°F
Transverse: -40 to 104°F		in/in/°F
Thermal Conductivity		Btu·in/hr/ft²/°F	ISO 8302
Electrical	Nominal Value	Unit	Test Method
Surface Resistivity		ohms	IEC 60093
Volume Resistivity		ohm·cm	IEC 60093
UL	Nominal Value	Unit	Test Method
RTI Str		°F	UL 746
RTI Imp		°F	UL 746
RTI Elec		°F	UL 746
Related Terminology
This supplier and product may also be known by these terms: GE Plastics Europe, LNP Engineering Plastics, GE Polymerland Europe, GE Polymerland, GE Plastics, Cycloy Product names can be difficult to match. You may have searched any one of these terms to find this product: CYCOLOY* C4210HF Resin, CYCOLOY C4210HF Resin, CYCOLOY* , CYCOLOY, CYCOLOYC4210HFResin, C 4210 HF Resin, C4210HF Resin, C4210, 4210HF, HFResin, C4210HFResin, Acrylonitrile Butadiene Styrene + PC, Acrylonitrile Butadiene Styrene PC, Acrylonitrile Butadiene Styrene : PC, Acrylonitrile Butadiene Styrene / PC, Acrylonitrile Butadiene Styrene - PC, Acrylonitrile Butadiene Styrene _ PC, Acrylonitrile Butadiene Styrene PC, ABS+PC, ABSPC, ABS:PC, ABS/PC, ABS-PC, ABS_PC, ABS PC, Acrylonitrile Butadiene Styrene, ABS, SABIC IP Euro, AcrylonitrileButadieneStyrenePC, AcrylonitrileButadieneStyrene, AcrylonitrileButadieneStyrene_PC, 4210C
Features
Features may also be described by the following terms: Pleasing Surface Appearance, High Heat Resistance, Low Shrinkage, Good Processability, Easy Processing, Medium Rigidity, Good Rigidity, Good Strength.

Injection	Nominal Value	Unit
Drying Temperature		°F
Drying Time		hr
Processing (Melt) Temp		°F
Mold Temperature		°F

Notes

¹Typical properties: these are not to be construed as specifications.

²Tensile Bar

³0.079 in/min

⁴Yield

⁵Break

⁶80*10*3 sp=62mm

⁷80*10*3

⁸120*10*4 mm

CYCOLOY* C4210HF Resin

Acrylonitrile Butadiene Styrene + PC

Glass Fiber Reinforcement, 10%

Supplied by SABIC Innovative Plastics Europe