GELOY CR7500 Resin SABIC IP Euro Acrylonitrile Styrene Acrylate + AMSAN

Product Description

High heat ASA with optimum flow-impact balance. For Automotive applications and Automotive colors only.

General

Material Status

Commercial: Active

Availability

Europe

Features

Good Flow

Good Impact Resistance

High Heat Resistance

Uses

Automotive Applications

RoHS Compliance

Processing Method

Injection Molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity
--			ASTM D792
--		g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR)			ASTM D1238
220°C/10.0 kg		g/10 min
260°C/5.0 kg		g/10 min
Melt Volume-Flow Rate (MVR)			ISO 1133
220°C/10.0 kg		in³/10min
260°C/5.0 kg		in³/10min
Molding Shrinkage - Flow (0.126 in)		in/in	Internal Method
Water Absorption			ISO 62
Saturation, 73°F		%
Equilibrium, 73°F, 50% RH		%
Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus
--²		psi	ASTM D638
--		psi	ISO 527-2/1
Tensile Strength
Yield³		psi	ASTM D638
Yield		psi	ISO 527-2/5
Break³		psi	ASTM D638
Break		psi	ISO 527-2/5
Tensile Elongation
Yield³		%	ASTM D638
Yield		%	ISO 527-2/5
Break³		%	ASTM D638
Break		%	ISO 527-2/5
Flexural Modulus
1.97 in Span⁴		psi	ASTM D790
--⁵		psi	ISO 178
Flexural Strength
--^5, 6		psi	ISO 178
Yield, 1.97 in Span⁴		psi	ASTM D790
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength⁷ (73°F)		ft·lb/in²	ISO 179/1eA
Notched Izod Impact
-22°F		ft·lb/in	ASTM D256
73°F		ft·lb/in	ASTM D256
-22°F⁸		ft·lb/in²	ISO 180/1A
73°F⁸		ft·lb/in²	ISO 180/1A
Instrumented Dart Impact (73°F, Total Energy)		in·lb	ASTM D3763
Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load
264 psi, Unannealed, 0.126 in		°F	ASTM D648
264 psi, Unannealed, 3.94 in Span⁹		°F	ISO 75-2/Ae
264 psi, Unannealed, 2.52 in Span¹⁰		°F	ISO 75-2/Af
Vicat Softening Temperature
--		°F	ASTM D1525¹¹
--		°F	ISO 306/B50
--		°F	ISO 306/B120
Ball Pressure Test¹² (208°F)			IEC 60695-10-2
CLTE			ASTM E831, ISO 11359-2
Flow: -40 to 104°F		in/in/°F
Transverse: -40 to 104°F		in/in/°F
Related Terminology
This supplier and product may also be known by these terms: GE Plastics Europe, LNP Engineering Plastics, GE Polymerland Europe, GE Polymerland, GE Plastics Product names can be difficult to match. You may have searched any one of these terms to find this product: GELOY* CR7500 Resin, GELOY CR7500 Resin, GELOY* , GELOY, GELOYCR7500Resin, CR 7500 Resin, CR7500 Resin, CR7500, 7500Resin, CR7500Resin, Acrylonitrile Styrene Acrylate + AMSAN, Acrylonitrile Styrene Acrylate AMSAN, Acrylonitrile Styrene Acrylate : AMSAN, Acrylonitrile Styrene Acrylate / AMSAN, Acrylonitrile Styrene Acrylate - AMSAN, Acrylonitrile Styrene Acrylate _ AMSAN, Acrylonitrile Styrene Acrylate AMSAN, ASA+AMSAN, ASAAMSAN, ASA:AMSAN, ASA/AMSAN, ASA-AMSAN, ASA_AMSAN, ASA AMSAN, Acrylonitrile Styrene Acrylate, ASA, SABIC IP Euro, AcrylonitrileStyreneAcrylateAMSAN, AcrylonitrileStyreneAcrylate, AcrylonitrileStyreneAcrylate_AMSAN, 7500CR
Features
Features may also be described by the following terms: Good Impact Resistance, Good Flow, High Heat Resistance.
Uses
Uses may also be described by the following terms: Automotive Applications, Automotive Sector.

Injection	Nominal Value	Unit
Drying Temperature		°F
Drying Time		hr
Drying Time, Maximum		hr
Suggested Max Moisture		%
Suggested Shot Size		%
Rear Temperature		°F
Middle Temperature		°F
Front Temperature		°F
Nozzle Temperature		°F
Processing (Melt) Temp		°F
Mold Temperature		°F
Back Pressure		psi
Screw Speed		rpm
Vent Depth		in

Notes

¹Typical properties: these are not to be construed as specifications.

²0.20 in/min

³Type I, 0.20 in/min

⁴0.051 in/min

⁵0.079 in/min

⁶Yield

⁷80*10*4 sp=62mm

⁸80*10*4

⁹120*10*4 mm

¹⁰80*10*4 mm

¹¹Rate B (120°C/h), Loading 2 (50 N)

¹²Approximate maximum

GELOY* CR7500 Resin

Acrylonitrile Styrene Acrylate + AMSAN

Supplied by SABIC Innovative Plastics Europe