IDES Prospector Already have an account? Login Here

IDES

Andur 1-75 DP

Polyurethane (Polyether, TDI)

Supplied by Anderson Development Company

The technical datasheet with complete property values for Andur 1-75 DP is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Andur 1-75 DP is a polyether based liquid isocyanate-terminated prepolymer. An elastomer with a hardness of 73-77 Shore D is obtained when this prepolymer is cured with Curene 442 [4,4'- methylene-bis (orthochloroaniline)]. Elastomers of lower hardness can be obtained by reaction with various polyols and their combination with Curene 442 and other diamines, and by the use of plasticizers.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Forms 
  • Liquid
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
ASTM D792
Thermoset
Nominal Value
Unit
Test Method
Thermoset Mix Viscosity
    ASTM D2393
158°F
cP
 
212°F
cP
 
Additional Information
NCO: 8.3 to 8.7%
Specific Gravity, ASTM D792, 212°F: 1.08 g/ml
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Andur 1-75 DP, Andur 175 DP, Andur , Andur175DP, 1-75 DP, 175 DP, 1:75 DP, 1/75 DP, 1+75 DP, 1_75 DP, 1 75 DP, 175, 75DP, 175DP, Polyurethane, 1_75DP, Polyurethane (Polyether, TDI), Polyurethane Polyether TDI, PUR-Ether/TDI, PUREtherTDI, PUR-Ether:TDI, PUR-Ether+TDI, PUR-Ether-TDI, PUR-Ether_TDI, PUR-Ether TDI, PUR:Ether/TDI, PUR/Ether/TDI, PUR+Ether/TDI, PUR_Ether/TDI, PUR Ether/TDI, PUR, Anderson, PolyurethanePolyetherTDI, PUREther_TDI, PUREther TDI, PUR_EtherTDI, PUR EtherTDI, 751
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.