Andur 1-95 AP/Curene® 442 Anderson Polyurethane (Polyether, TDI)

Product Description
Andur 1-95AP is a polyether (PTMG) based liquid, toluene diisocyanate terminated prepolymer. An elastomer with a hardness of 95 Shore A is obtained when this prepolymer is cured with Curene 442 [4,4'-methylene-bis (orthochloroaniline)]. Elastomers of lower hardness can be obtained by curing Andur 1-95AP with polyols and their combination with Curene 442 and other diamines, or through the use of plasticizers.
General
Material Status	Commercial: Active
Availability	North America
Forms	Liquid

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ASTM D1505
Elastomers	Nominal Value	Unit	Test Method
Tensile Stress			ASTM D412
100% Strain		psi
300% Strain		psi
Tensile Strength (Yield)		psi	ASTM D412
Tensile Elongation (Break)		%	ASTM D412
Compression Set		%	ASTM D395B
Bayshore Resilience		%	ASTM D2632
Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore A)			ASTM D2240
Thermoset	Nominal Value	Unit	Test Method
Pot Life		min
Demold Time		min
Post Cure Time (205°F)		hr
Additional Information
Durometer Hardness, ASTM D2240, Shore A: 93 to 97 Die C Tear, ASTM D1004: 575 pli Average Split Tear, ASTM D1938: 175 pli Stoichiometry Curative Level: 95% Mix Temperature: Andur 1-95 AP: 170-212°F Curene 442: 235-250°F
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Andur 1-95 AP/Curene® 442, Andur 195 APCurene 442, Andur , Andur195APCurene442, 1 95 AP Curene 442, 1-95 AP/Curene® 442, 195 APCurene 442, 1-95 AP:Curene® 442, 1-95 AP+Curene® 442, 1-95 AP-Curene® 442, 1-95 AP_Curene® 442, 1-95 AP Curene® 442, 1:95 AP/Curene® 442, 1/95 AP/Curene® 442, 1+95 AP/Curene® 442, 1_95 AP/Curene® 442, 1 95 AP/Curene® 442, 195, 95AP, APCurene, Curene442, 195APCurene442, 195 AP_Curene 442, 195 AP Curene 442, 1_95 APCurene 442, 1 95 APCurene 442, Polyurethane, 195AP_Curene442, 1_95APCurene442, Polyurethane (Polyether, TDI), Polyurethane Polyether TDI, PUR-Ether/TDI, PUREtherTDI, PUR-Ether:TDI, PUR-Ether+TDI, PUR-Ether-TDI, PUR-Ether_TDI, PUR-Ether TDI, PUR:Ether/TDI, PUR/Ether/TDI, PUR+Ether/TDI, PUR_Ether/TDI, PUR Ether/TDI, PUR, Anderson, PolyurethanePolyetherTDI, PUREther_TDI, PUREther TDI, PUR_EtherTDI, PUR EtherTDI, 951

Injection	Nominal Value	Unit
Mold Temperature		°F

Notes

¹Typical properties: these are not to be construed as specifications.

Andur 1-95 AP/Curene® 442

Polyurethane (Polyether, TDI)

Supplied by Anderson Development Company