Andur 6 APLM/Curene® 442 Anderson Polycaprolactone

Product Description
Andur 6 APLM is a polycaprolactone based, toluene diisocyanate terminated prepolymer. This high-performance system yields an elastomer with a hardness of about 60 Shore A when this prepolymer is cured with Curene 442 [4,4'-ethylenebis (orthochloroaniline)]. This system avoids this use of mixed curatives or plasticizers which are usually required to achieve hardnesses in this range, thereby, resulting in ultra high-performance properties.
General
Material Status	Commercial: Active
Availability	North America
Features	Biodegradable
Forms	Liquid

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ASTM D1505
Elastomers	Nominal Value	Unit	Test Method
Tensile Stress			ASTM D412
100% Strain		psi
300% Strain		psi
Tensile Strength (Yield)		psi	ASTM D412
Tensile Elongation (Break)		%	ASTM D412
Bayshore Resilience		%	ASTM D2632
Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore A)			ASTM D2240
Thermoset	Nominal Value	Unit	Test Method
Pot Life		min
Demold Time (240°F)		min
Post Cure Time (212°F)		hr
Additional Information
Durometer Hardness, ASTM D2240, Shore A: 57 to 62 Die C Tear, ASTM D1004: 190 pli Average Split Tear, ASTM D1938: 80 pli Stoichiometry Curative Level: 95% Mix Temperature: Andur 6 APLM: 212°F Curene 442: 230-240°F
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Andur 6 APLM/Curene® 442, Andur 6 APLMCurene 442, Andur , Andur6APLMCurene442, 6 APLM, 6 APLM/Curene® 442, 6 APLMCurene 442, 6 APLM:Curene® 442, 6 APLM+Curene® 442, 6 APLM-Curene® 442, 6 APLM_Curene® 442, 6 APLM Curene® 442, 6APLM, APLMCurene, Curene442, 6APLMCurene442, 6 APLM_Curene 442, 6 APLM Curene 442, 6APLM_Curene442, Polycaprolactone, PCL, Anderson, APLM6

Injection	Nominal Value	Unit
Mold Temperature		°F

Andur 6 APLM/Curene® 442