IDES Prospector Already have an account? Login Here

IDES

Stat-Tech™ AS-15CF/000

Acrylonitrile Butadiene Styrene

Carbon Fiber Reinforcement, 15%

Supplied by PolyOne Corporation

The technical datasheet with complete property values for Stat-Tech™ AS-15CF/000 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Stat-Tech™ Electrically Conductive Compounds are specifically engineered to provide anti-static, ESD and RFI/EMI shielding performance for critical electronic equipment applications. These compounds combine the performance of select engineering resins with reinforcing additives such as carbon powder, carbon fiber, nickel-coated carbon fiber and stainless steel fiber, for low-to-high levels of conductivity depending upon application requirements.
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • North America
  • South America
Filler / Reinforcement 
  • Carbon Fiber Reinforcement, 15% Filler by Weight
Features 
  • Electrically Conductive
  • Electromagnetic Shielding (EMI)
  • ESD Protection
  • Radio Frequency Shielding (RFI)
  
Uses 
  • Aerospace Applications
  • Automotive Under the Hood
  • Business Equipment
  • Electrical/Electronic Applications
  • Housings
  • Printer Parts
RoHS Compliance 
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Molding Shrinkage - Flow
in/in
 ASTM D955
Water Absorption (24 hr, 0.125 in)
%
 ASTM D570
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus 2
psi
 ASTM D638
Tensile Strength 2 (Yield)
psi
 ASTM D638
Tensile Elongation 2 (Break)
%
 ASTM D638
Flexural Modulus
psi
 ASTM D790
Flexural Strength
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (73°F, 0.250 in, Injection Molded)
ft·lb/in
 ASTM D256A
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
     ASTM D648
66 psi, Unannealed, 0.250 in
°F
  
264 psi, Unannealed, 0.250 in
°F
  
Electrical
Nominal Value
Unit
Test Method
Surface Resistivity
ohm
 ASTM D257
Volume Resistivity
ohm·cm
 ASTM D257
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL
 
 UL 94
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Stat-Tech™ AS-15CF/000, StatTech AS15CF000, Stat-Tech™ , StatTech, Stat:Tech™, Stat/Tech™, Stat+Tech™, Stat_Tech™, Stat Tech™, StatTechAS15CF000, Stat_Tech, Stat Tech, AS, AS 15 CF 000, AS-15CF/000, AS15CF000, AS-15CF:000, AS-15CF+000, AS-15CF-000, AS-15CF_000, AS-15CF 000, AS:15CF/000, AS/15CF/000, AS+15CF/000, AS_15CF/000, AS 15CF/000, AS15, 15CF, CF000, AS15CF_000, AS15CF 000, AS_15CF000, AS 15CF000, Acrylonitrile Butadiene Styrene, ABS, PolyOne, AcrylonitrileButadieneStyrene, 15AS
Features
Features may also be described by the following terms: Electromagnetic Shielding (EMI), EMI Shielding, Radio Frequency Shielding (RFI), RFI Shielding, Radio Frequency Interference Shielding, Electrically Conductive, Conducts Electricity, Conductive, Electrostatic Discharge Protection, ESD Protection.
Uses
Uses may also be described by the following terms: Business Equipment, Business Machines, Housings, Housing, Electrical Applications, Electronic Applications, Electrical/Electronic Applications, Electrical Sector.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
2Type I, 0.20 in/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.