IDES Prospector Already have an account? Login Here

IDES

KRYSTALFLEX™ PE900

Polyurethane (Polyether, Aliphatic)

Supplied by Huntsman Corporation

The technical datasheet with complete property values for KRYSTALFLEX™ PE900 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
KRYSTALFLEX PE900 is designed for use by glass laminators to seal the edges of multi-layer composites made from glass or glass/plastic components. It offers the following benefits:
  • Provides a degree of protection to the edge of the glass laminate from chipping or other mild physical damage
  • Minimizes moisture penetration between the composite layers
  • Minimizes migration and potential damage from solvents contained in the caulks used to install the finished glass laminate
  • Creates an aesthetically pleasing appearance on the laminate edge.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • North America
Features 
  • Good UV Resistance
  • Hydrolysis Resistant
  • Low Temperature Flexibility
  • Medium Hardness
  
RoHS Compliance 
Forms 
  • Film
Elastomers
Nominal Value
Unit
Test Method
Tensile Strength 2 (Yield)
psi
 ASTM D412
Tensile Elongation 2 (Break)
%
 ASTM D412
Additional Information
Average Peel Strength, ASTM D3167, 6 in/min: >150 pli
Typical Laminating Parameters:
Ultimate Temperature: 90 to 140°C
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: KRYSTALFLEX™ PE900, KRYSTALFLEX PE900, KRYSTALFLEX™ , KRYSTALFLEX, KRYSTALFLEXPE900, PE 900, PE900, Polyurethane, Polyurethane (Polyether, Aliphatic), Polyurethane Polyether Aliphatic, PUR-Eth,aliphat, PUREthaliphat, PUR:Eth,aliphat, PUR/Eth,aliphat, PUR+Eth,aliphat, PUR_Eth,aliphat, PUR Eth,aliphat, PUR, Huntsman, PolyurethanePolyetherAliphatic, PUR_Ethaliphat, PUR Ethaliphat, 900PE
Features
Features may also be described by the following terms: Good UV Resistance, UV Resistant, Ultraviolet Resistant, Ultraviolet Light Resistant, Medium Hardness, Low Temperature Flexibility.
Notes
1Typical properties: these are not to be construed as specifications.
220 in/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.