IDES Prospector Already have an account? Login Here

IDES

Teflon® FEP 6100

Perfluoroethylene Propylene Copolymer

Supplied by DuPont Fluoropolymers

The technical datasheet with complete property values for Teflon® FEP 6100 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
DuPont™ Teflon FEP 6100 fluoropolymer resin is a melt-processable fluoropolymer resin specifically designed for high-speed extrusion of thin coatings on small-gauge wires for twisted-pair constructions.

As shown in Table 1, this resin provides the electrical and mechanical properties needed for lowvoltage applications. In addition, Teflon® FEP 6100 has a higher melt flow rate than most other fluoropolymer resins. This permits higher extrusion speeds and easier processing, making Teflon® FEP 6100 a cost-effective alternative for producing thin-wall extrusions.

Teflon® FEP 6100 possesses a balance of processing and performance properties, which makes it an excellent choice for many applications. Like Teflon® fluoropolymer resins, Teflon® FEP 6100 offers an excellent combination of properties:
low flammability
-exceptional dielectric properties
-heat resistance
-toughness
-flexibility
-low coefficient of friction
-nonstick characteristics
-negligible moisture absorption
-chemical inertness
-performance at temperature extremes
-weather resistance
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • North America
  • South America
 
Features 
  • Good Chemical Resistance
  • Good Flexibility
  • Good Toughness
  • Good Weather Resistance
  • High Heat Resistance
  • Low Friction
  • Low Moisture Absorption
Uses 
  • Wire & Cable Applications
Forms 
  • Pellets
Processing Method 
  • Coating
  • Extrusion
 
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
ASTM D792
Melt Mass-Flow Rate (MFR) (372°C/5.0 kg)
g/10 min
ASTM D1238
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength
psi
ASTM D638
Tensile Elongation (Break)
%
ASTM D638
Flexural Modulus
psi
ASTM D790A
Thermal
Nominal Value
Unit
Test Method
Melting Temperature
°F
 
Electrical
Nominal Value
Unit
Test Method
Dielectric Constant
    ASTM D2520
100 kHz
 
 
1 MHz
 
 
600 MHz
 
 
Dissipation Factor
    ASTM D2520
100 kHz
 
 
1 MHz
 
 
600 MHz
 
 
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Teflon® FEP 6100, Teflon FEP 6100, Teflon® FEP , Teflon FEP, TeflonFEP6100, TeflonFEP, FEP 6100, FEP6100, FEP, 6100, Perfluoroethylene Propylene Copolymer, Fluoropolymer, DuPont Fluoro, PerfluoroethylenePropyleneCopolymer, 6100FEP
Features
Features may also be described by the following terms: Good Chemical Resistance, Chemical Resistant, Good Flexibility, Flexible, Low Friction, High Heat Resistance, Low Moisture Absorption, Low Water Absorption, Water Resistant, Moisture Resistant, Good Toughness, Tough, Good Weather Resistance, Weather Resistant.
Uses
Uses may also be described by the following terms: Wire and Cable Applications, Wire & Cable Applications.
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.