IDES Prospector Already have an account? Login Here

IDES

HAIPLEN H50 T2

Polypropylene Homopolymer

Talc Filler, 10%

Supplied by Taro Plast S.p.A.

The technical datasheet with complete property values for HAIPLEN H50 T2 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Polypropylene homopolymer talcum filled 10%.

Available: all colors, UV stabilized (L), heat stabilized (H), laser printable (LP), detergent stabilized (D).
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Filler / Reinforcement 
  • Talc Filler, 10% Filler by Weight
Additive 
  • Heat Stabilizer
  • UV Stabilizer
  
Features 
  • Detergent Resistant
  • Good UV Resistance
  • Heat Stabilized
  • Homopolymer
  • Laser Markable
Appearance 
  • Colors Available
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Specific Gravity
      
--
 
 ASTM D792
--
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ASTM D1238, ISO 1133
Molding Shrinkage
     ASTM D955
Flow
in/in
  
Across Flow
in/in
  
Water Absorption (73°F, 24 hr)
%
 ASTM D570, ISO 62
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength (Yield)
psi
 ASTM D638, ISO 527-2
Tensile Elongation (Break)
%
 ASTM D638, ISO 527-2
Flexural Modulus
psi
 ASTM D790, ISO 178
Flexural Strength
      
--
psi
 ISO 178
Break
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact
ft·lb/in
 ISO 180, ASTM D256
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (264 psi, Unannealed)
°F
 ASTM D648, ISO 75-2/A
Vicat Softening Temperature
      
--
°F
 ASTM D1525 2, ISO 306/A 2
--
°F
 ASTM D1525 3, ISO 306/B 3
CLTE - Flow
in/in/°F
 ASTM D696
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL (0.126 in)
 
 UL 94
Glow Wire Flammability Index (0.0394 in)
°F
 IEC 60695-2-12
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: HAIPLEN H50 T2, HAIPLEN , HAIPLENH50T2, H 50 T 2, H50 T2, H50, 50T, T2, H50T2, Polypropylene Homopolymer, PP Homopolymer, Polypropylene, PP, Taro Plast, PolypropyleneHomopolymer, PPHomopolymer, 50H
Features
Features may also be described by the following terms: Heat Stabilized, Heat-ageing Stabilized, Heat Ageing Stabilized, Heat-aging Stabilized, Heat Aging Stabilized, Detergent Resistant, Detergent Resistance, Good UV Resistance, UV Resistant, Ultraviolet Resistant, Ultraviolet Light Resistant.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Injection Rate
 
  
Notes
1Typical properties: these are not to be construed as specifications.
2Loading 1 (10 N)
3Loading 2 (50 N)
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.